Catalog excerpts
HK-30G Pneumatic Cutting Machine The pneumatic cutting machine uses oxygen which is essential of gas flame cutting to realize the automatic walking function and ensure the cutting quality. It can also walk at the constant speed, and provide enough dynamic at a low speed due to the application of the pneumatic motor of low differential pressure and high torque. The pneumatic motor drive is used for this machine motor drive, which not only reduces side effects of electrical system, but also ensures the cutting quality and work efficiency, < The machine can automatically cut in the condition of no power supply, which is flexible and efficient. ■< Omitting all electric components, thoroughly eliminating the potential safety hazard of electrics in the severe environment. ^ It is widely applied to such industries as shipbuilding, oil, metallurgy and machining. -4 CGI-30 • MAX-3 cutting machine adopts high-strength aluminium alloy ingot materials and is manufactured through accurate die-casting. Its structure is designed reasonably with good stability in movement ■4 The speed control system of the device adopts a mechanical two-cone stepless speed change system to control the speed more intuitively. ■4 The device adopts a double-layer insulation board, which substantially reduces the impact of high temperature and moist environment in cutting. The machine adopts an imported alternator with cooling fan, in which the carbon brush need not be changed. < The device is extremely appropriate for cutting moderately thick materials, and two cutting torches may be installed in the same time as needed to cut a groove; ■< The user may also selectively purchase disk guide rail and radius rod to cut round spare parts. •4 The device is applicable to ship building, petroleum, metallurgy, and metal structure, etc. HK-5NX cutting machine adopts high-strength aluminium alloy ingot materials and is manufactured through accurate die-casting. Its structure is designed reasonably with good stability in movement. ■4 The speed control system of the device adopts a mechanical noise-reduction protection stepless speed change system to control the speed, which is convenient for operation and maintenance. ■4 The device adopts mechanical reversing system and the motor may rotate toward a direction to lengthen the service life of the motor. ■< Sides of the device are installed with double-layer insulation board to prevent the machine from warming, which substantially reduces the impact of high temperature and moist environment in cutting. < The machine adopts an imported alternator with cooling fan, in which the carbon brush need not be changed. Two rated voltages may be selected by the user. Two cutting torches may be installed in the same time as needed to cut a groove; HK-5NX ^ The user may also selectively purchase disk guide rail and radius rod to cut round spare parts. ■4 The device is applicable to ship building, petroleum, metallurgy, and metal structure, etc Order Model LxWxH Cutting Thickness Cutting Speed Dia.of.Clrde Cutting Total Weight
Open the catalog to page 1
