CGT-30F Square Gas Cutting Machine ■4 The main body is made of high strength aluminum alloy, produced ■4 The speed is adjusted by controlled silicon unit. ■4 Equipped with driving motor to make the torch to move horizontally. --- "+"Switch can control the direction of forward, backward, up and down freely. ■4 The high-speed switch is affixed to the assembly of hose, easy to operate. ■4 The squire shape or parallelogram can be made by only once cutting. ■4 Widely use in shipbuilding, boiler, chemical and metel structure CG,-75 Ingot Gas Cutting Machine -*The main body is made of aluminum and its compact structure to improve stablity of movement -4 Speed system is adjusted by integrate circuit for regular and steady running. ■4 Professional straight cutting for more thick ingot. ■4 Especially for ingot cutting. GCD-300 Ingot Gas Cutting Machine Supply Voltage Cutting Thickness Cutting Speed Total Weight HCM-200 Series Portable Flame Cutting Maching ■4 Integral carrying handle, lightweight and balanced designer allow the machine to be carried with one hand. -4 A balanced design makes the machine stable when cutting, allowing a racking distance of up to 18" from the machine with a standard torch, and no counterweight is required. Note: Rail is optional part Order NO. Model NO. LxWxH(mm) Speed Range Power Requirements Cutting Length: Circle Diameter: HCM-200 and HCM-200HT: 115V.42A60HZ, Tractor Unit alone: 1 to 60 inches per minute (25 to 1524 mm per minute) Single phase E Models; 30.5 lbs (13.8Kg) HCM-200HS: 20OV.23A5OHZ/.21A6OHZ, Tractor Unit with rigging: 510120 inches per minute (127 to 3048 mm per minute) single phase 37.5 lbs (17