Rebar Cold Bend Testing Machine LWS Series │ LWS-200/300 3 Introduction HUALONG LWS-300 is specially designed to test bend-resistance performance of reinforced rolling steel bars, building steel reinforcements and steel pipes which completely meet the requirements of ASTM A615 A615M, ISO 7438 and other international and national specifications. Generally, the deformed and plain carbon steel bars for concrete reinforcement in cut lengths shall withstand being bent around a pin without cracking on the outside radius of the bent portion. Features The Mandrel is interchangeable to meet requirements of specimens with varying diameters. Adjustable distance between rollers to accommodate specimens of varying diameters and shapes. Simple manual control to finish a testing procedure by pressing down corresponding buttons. The whole is cased to protect every single component from the dust, and the operator from any possible danger. A small bowl has been fitted under the beam, where the steel bar is bent.

Straight forward control panel The machine consists essentially of a hydraulic power pack with cylindrical mandrel-stem, mounted vertically within a strong steel frame which also carries two fixed reaction rollers. Two 80 mm dia. rollers are supplied; Two contrasting rollers are fitted on the beam. They may easily be adjusted in distance to be in accordance with the Standards concerning bars having diameter between 5mmand 40 mm or 5mm and 50 mm. Extremely simple and user friendly control panel ensure the operator knows how to operate it without any trainings. Operator only needs to push down...