Cold Bend Testing Machine LWS Series │ LWS-160 - Features The Mandrel is interchangeable to meet requirements of specimens with varying diameters. Adjustable distance between rollers to accommodate specimens of varying diameters and shapes. Simple manual control to finish a testing procedure by pressing down corresponding buttons. The whole is cased to protect every single component from the dust, and the operator from any possible danger. A small bowl has been fitted under the beam, where the steel bar is bent. Introduction LWS-160 is specially designed to test bend-resistance performance of reinforced rolling steel bars, building steel reinforcements and steel pipes which completely meet the requirements of ASTM A615 A615M, ISO 7438 and other international and national specifications. Generally, the deformed and plain carbon steel bars for concrete reinforcement in cut lengths shall withstand being bent around a pin without cracking on the outside radius of the bent portion. Used for bending and straightening steel reinforcing bars. Two types of test can be performed depending upon size and quality of specimens: 1. Bending the specimen through 90° and then straightening it then straighten it of at least 20°. 2. Bending through 180

Test Platform Manual wheel to ro:ate the endless screw which is driving the y,_—— rollers, through which finally adjjst the distance bstAieen rollers. The machine consists essentially of a hydraulic power pack with cylindrical mandrel-stem, mounted horizontally within a strong steel frame which also carries two fixed reaction rollers. Two Two contrasting rollers are fitted on the beam. They may easily be adjusted in distance to be in accordance with the Standards concerning bars having diameter between 5 and 40 mm. Control panel Fixing and changing the mandrels on top of the thrust cylinder is...

Technical specifications Model Load capacity (kN) Distance between rollers (mm) Ram stroke (mm) Bending angle (°) Cylindrical specimen diameter (mm) Flat specimen dimensions (mm) Mandrels (mm) A615/A615M: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement1. ISO 7438: Metallic materials -- Bend test. Dimensions (mm) 1450 x 680 x 1050 Power 3P-380 VAC ±10%; 2.2kW 800 Weight kg Note: 1. Mandrels and mandrel holders must be ordered separately. 2. Custom power system for different countries and regions are available. 3. 60 Liters 46# or 68# anti-wear hydraulic...