*mydirectindustry

Catalogs
Shanghai Guorui Hydraulic Technology Co., Ltd
DC-F39-2.5-E-2-24-8H-A

DC-F39-2.5-E-2-24-8H-A

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for a power unit designed for van trucks. It includes details on installation, maintenance, and features of the unit.

Specifications: The power unit operates at 2Kw, 2800RPM, and 50Hz. It is designed for horizontal installation and is classified as S3 working type, meaning it cannot work continuously but can operate repeatedly.

Installation and Maintenance Procedures:

Ensure all components such as the tank, tube, and fittings are clean and free of impurities before installation.
The recommended oil viscosity is between 15-68CST, and it should be clean and free of impurities. N46 hydraulic oil is suggested, and aviation hydraulic fluid is required for all-weather operations.
Check the oil tank immediately after the first operation to ensure there is enough oil.
Replace the hydraulic oil after the first 100 working hours and subsequently every 3000 working hours.

Features: The hydraulic power unit comprises a high-pressure gear pump, AC motor, multi-manifold, hydraulic valve, and oil tank. It supports four double-action tanks and provides a wing opening function for van trucks.

Additional Notes: The document includes a table with specifications such as motor model, displacement, tank capacity, pressure, and port size, but the details are incomplete.

Catalog excerpts

Power Unit for Van Truck FEATURES This hydraulic power unit is made up of high pressure gear pump, AC motor, multi-manifold, hydraulic valve, oil tank, etc. It permit usage for four double action tank , provide wing opening function for van truck, 1.This power unit is S3 working type, can not work continuously, can work repeatedly. 2.Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities. 3.Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil. If need to work all-weather, must use aviation hydraulic fluid. 4.This power unit is horizontal installation. 5.After first work, oil tank should be checked immediately to see if there s enough oil. 6.After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

Open the catalog to page 1

DC-F39-2.5-E-2-24-8H-A

DC-F39-2.5-E-2-24-8H-A

Catalog excerpts

All Shanghai Guorui Hydraulic Technology Co., Ltd catalogs and technical brochures