Micro Power Unit for Medical Equipment T This hydraulic power unit is made up of motorized operating bed in medical equipment, low noise and electricty, light body, provide the power origin for operating bed, also used in electric bed. Specifications Modle Port Size Introductions: If need specifications like: pumps with different flow, pressure, motor power, please see the model introductions of hydraulic power unit. Notice 1.This power unit is S3 working type, can not work continuously, can work repeatedly. 2.Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities. 3.Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil. If need to work all-weather, must use aviation hydraulic fluid. 4.This power unit is horizontal installation. 5.After first work, oil tank should be checked immediately to see if there’ s enough oil. 6.After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours. Micro Power Unit for Medical Equipment