BMRW ©^^^, ffi©^a:&250 bar0 ©SW^fflSo ©^-fa'MM, *ifeo ©raw^twisttio Features: ©Long life-span at pressures up to 250 bar. ©High efficiency, even under considerable pressure. ©High starting torque. ©Compact and light weight. ©Wide range of mounting possibilities ©Shaft seal can bear high pressure of back and the motor can be used in parallel or series. Specification Data BMRW Dimension and Mounting data Output Shaft ©ffifffflti: K^®ffi^,tt®37~73cst,^®^^®ISO18/13o ©Saif^WS80"Co {£©^#WS*n'ffi£SJ10MPa. ^ffi©sa5MPa, sawai»i«w. © Max. pressure is the allowed pressure at the inlet port. © A simultaneous maximum RPM and maximum pressure NOT recommended Maximum pressure or maximum RPM operation: 10% of every minute. © Recommended fluids: Anti-wear type of hydraulic oil. viscosity recommended 3773 cSt. Recommended filtration ISO18/13. © Maximum operating temperature recommended 80C. © Special high pressure capacity shaft seal ensures back pressure up to 10 Mpa. Recommended preferable back pressure 5 Mpa. Case drain line is recommended when back pressure higher than 5 Mpa.. The motor life is benefited from a case drain line. © It is highly recommended that the motor runs at 30% of rated pressure for at least one hour before application of full load. Be sure the motor is filled with fluid prior to any load applications. AiPSi, Standard Direction of The Motor Rotation: CW-When A Port pressurized, viewed From the Shaft End.