©^-fa'MM, *ifeo ©raw^twisttio Features: ©Long life-span at pressures up to 250 bar. ©High efficiency, even under considerable pressure. ©High starting torque. ©Compact and light weight. ©Wide range of mounting possibilities ©Shaft seal can bear high pressure of back and the motor can be used in parallel or series. BM4 BM4 Standard Motor-Dimension and Mounting data Specification Data _75 70 Shaft Side Load Capacity ©ffifffflti: K^®ffi^,tt®37~73cst,^®^^®ISO18/13o ©ft^Xf^^80Co {£©^#WS*n'ffi£SJ10MPa. #ffi*j®&5MPa, *#ffiS*X^ffi©W30%ar^^1©Wo © Max. pressure is the allowed pressure at the inlet port. © A simultaneous maximum RPM and maximum pressure NOT recommended Maximum pressure or maximum RPM operation: 10% of every minute. © Recommended fluids: Anti-wear type of hydraulic oil. viscosity recommended 3773 cSt. Recommended filtration ISO18/13. © Maximum operating temperature recommended 80C. © Special high pressure capacity shaft seal ensures back pressure up to 10 Mpa. Recommended preferable back pressure 5 Mpa. Case drain line is recommended when back pressure higher than 5 Mpa.. The motor life is benefited from a case drain line. © It is highly recommended that the motor runs at 30% of rated pressure for at least one hour before application of full load. Be sure the motor is filled with fluid prior to any load applications. Square Spline C 6 teeth D Straight 032

BM4 BM4 BM4 Wheel motor-Dimension and Mounting data BM4 BM4 Rhombic Flange motor-Dimension and Mounting data Flat Root Side Fit 14 Tooth 12/24 Spline to fit ANSI B92.1 1976