BM3 ©^M®$^nm+, *stEa, ^Sfi. Features: Bm3 motor is a spool valve with double ball-bearing type motor: Characteristic features: ©Supported by double ball-bearing, the shaft can carry bigger radial force than BM2 motor. ©Credible design for shaft seal , which can bear high pressure and be used in parallel or in series. ©irection of shaft rotation and speed can be controlled easily and smoothly. ©Best combination of efficiency and economy in medium duty applications. BM3 Dimension and Mounting data ©ffiffffli: K^^ffii,f£ff37~73cst,i^^^KISO18/130 ©ft^If^iS80C„ #ffi*jg&5MPa, sawai»i«w. © Max. pressure is the allowed pressure at the inlet port. © A simultaneous maximum RPM and maximum pressure NOT recommended Maximum pressure or maximum RPM operation: 10% of every minute. © Recommended fluids: Anti-wear type of hydraulic oil. viscosity recommended 3773 cSt. Recommended filtration ISO18/13. © Maximum operating temperature recommended 80C. © Special high pressure capacity shaft seal ensures back pressure up to 10 Mpa. Recommended preferable back pressure 5 Mpa. Case drain line is recommended when back pressure higher than 5 Mpa.. The motor life is benefited from a case drain line. © It is highly recommended that the motor runs at 30% of rated pressure for at least one hour before application of full load. Be sure the motor is filled with fluid prior to any load applications. M8J Ainai, Standard Direction of The Motor Rotation: CW-When A Port pressurized, viewed From the Shaft End.

231 Series Manifold mount