AC-F40-3.2-F-1.5-380-1440-6H-C hydraulic power unit

Product catalog summary

Overview
This document details the specifications and operational guidelines for a hydraulic power unit designed for tyre presses. The unit includes a high-pressure gear pump, AC motor, multi-manifold, hydraulic valve, and oil tank, and is capable of controlling three sets of double-acting cylinders.

Specifications

Motor Model: AC-F40-3.2/F-1.5/380/1440/**-6H-C and AC-F40-4.2/F-2.2/380/1440/**-6H-C
Displacement: 3.2 cc/r and 4.2 cc/r
Tank Capacity: 6 liters
Pressure: Not specified
Port Size: G1/4 Horizontal
Installation: Horizontal
Power Supply: 380V, 2.2Kw, 1440RPM, 50Hz and 380V, 1.5Kw, 1440RPM, 50Hz

Operational Guidelines

The power unit is of S3 working type, meaning it cannot operate continuously but can work repeatedly.
Ensure all components such as the tank, tube, and fittings are clean and free of impurities before installation.
Use oil with a viscosity of 15-68 CST, preferably N46 hydraulic oil. For all-weather operations, aviation hydraulic fluid is recommended.
Check the oil tank immediately after the first operation to ensure there is enough oil.
Replace hydraulic oil after the first 100 working hours, and subsequently every 3000 working hours.

Additional Notes

The unit is designed for horizontal installation.

Catalog excerpts

AC-F40-3.2-F-1.5-380-1440-6H-C hydraulic power unit-1

FEATURES a-tt. *n$*vjmrait. This hydraulic power unit is made up of high pressure gear pump, AC motor, multi-manifold, hydraulic valve, oil tank, etc. It is designed for tyre press, controling 3 sets of double-acting cylinder. 1.This power unit is S3 working type, can not work continuously, can work repeatedly. 2.Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities. 3.Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil. If need to work all-weather, must use aviation hydraulic fluid. 4.This power unit is horizontal installation. 5.After first work, oil tank should be checked immediately to see if there s enough oil. 6.After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

Open the catalog to page 1