Linofire-HTC Series Burners Linofire-HTC series burners are a high-power burner designed by Rapidflame (RAPIDFLAME UK) according to the European Standard EN746-2. Linofire-HTC burner is installed in the air duct, can produce a wide flame heating area in a short time, can be used in a variety of medium and low temperature heating applications, such as hot air oven, industrial drying furnace and hot air furnace, especially for the limited heating space. Designed specifically for direct-combustion air heating applications Low CO, NOx emissions The burner adjustment ratio up to 30:1 No combustion engine is required Modular design, flexible combination

LINOFIRE-HTC Burner i± m & ^ m m m Make The Combustion Perfect And Simple » Type Definition » Parameters Basic parameters

LINOFIRE-HTC Burner i± m & ^ m m m Make The Combustion Perfect And Simple » Data Curve Air pressure drop, wind speed, and flame length at 580kW / ft power Flame length ratio Power output percentage % Air Stream Flammability Chart

LINOFIRE-HTC Burner i± m & ^ m m m Make The Combustion Perfect And Simple » Typical application^ Typical applications include grain drying, chemical drying, baking and curing, metal parts molding and all applications with fresh air heating below 800°C. In the above application, the burner can choose the appropriate combination mode according to the field working conditions. The typical combination mode is: Suction full fresh air system matters need attention • The heated air oxygen content is 21% • The flow rate of the heated air fluctuates by plus or minus 15% • Rated power is 580k W per foot...

LINOFIRE-HTC Burner i± m & ^ m m m Make The Combustion Perfect And Simple » Dimensions (in mm)Linear type 0.5ft 153 Linear type 1ft (back intake)

LINOFIRE-HTC Burner i± m & ^ m m m Make The Combustion Perfect And Simple Type 3ft (back intake)

LINOFIRE-HTC Burner i± m & ^ m m m Make The Combustion Perfect And Simple » Installation precautionsInstallation requirements Burner Burner bracket • The gap between the burner and the baffle is 50mm The distance between the combustion nozzle and the inner wall of the air duct is 150mm Wind speed range of 18-25 m/s Hot air side The burner extends out of the wind deflector 30-40 Air flow velocity through the baffle 18-25m/s. Please consult the manufacturer for the size diagram of the baffle opening. Wind pressure differential switch In order to ensure the uniform distribution of combustion gas,...

LINOFIRE-HTC Burner Make The Combustion Perfect And Simple installation diagram UV mounting hole RP1/2" Ignition gas inlet RP1/4" Spark plug installation hole M14×1.5 Ion rod interface RP1/4" Burner fixing plate Note: The unused interface on the ignition end plate shall be sealed with a plug. Application Adapted to the full series Adapted to the full series Shanghai DYDTEC Combustion Equipment Co., Ltd. Address:1 F, 3rd Building, 1/4 F, 1st Building, No.111, Zhiye Road Pudong District, Shanghai,China +86 400 606 8918 [email protected] export.dydtec.co