Extflame Gas Burner Is a high-precision temperature control burner designed by DYDTEC company for medium and high temperature industrial applications. Extflame is a nozzle mixed burner, the length of the fire cylinder can be customized according to the need, with the characteristics of high flame speed, super wide power adjustment range, full combustion, stable and high efficiency of heat transfer. The maximum combustor temperature is 1200°C. The maximum operating velocity of the flame is 150 m/s. Preheated air can be used for combustion support. Spark plug fires directly. Suitable for natural gas, liquefied petroleum gas. The length of the flame protector can be customized. export.dydtec.com www.airotation.com

Extflame-High-temperature burner Extflame Series Burner I More model parameters, please consult DYDTEC in detail. Data determination conditions in the table: 200mm long flame protector, natural gas & combustion air temperature 20 C, 15% excess air, back pressure of combustion chamber OPa.

Extflame-High-temperature burner Gas inlet pressure difference (200mm long torch, natural gas, detection position: burner gas pressure gauge) Differential pressure of air inlet (200mm long torch, detection position: burner combustion air pressure gauge) I2SSSI mss Note: NOX emission data is based on natural gas, 850°C combustor temperature, high-speed burner test. NOX emission data are for reference only. NOX emission will also be affected by combustor temperature, combustor structure, excess air coefficient and other factors. ExtFG-020 Natural gas inlet pressure difference (200mm long flame...

Extflame-High-temperature burner Natural gas inlet pressure difference (200mm long flame protector, natural gas, detection position: burner gas pressure measuring port) Differential pressure of air inlet (200mm long torch, detection position: burner combustion air pressure gauge) Note: NOX emission data is based on natural gas, 850°C combustor temperature, high-speed burner test, NOX emission data are for reference only. NOX emission will also be affected by combustor temperature, combustor structure, excess air coefficient and other factors. » ApplicationExtflame Burner is widely used in various...

Extflame-High-temperature burner Make The Combustion Perfect And Simple

Extflame-High-temperature burner Inlet direction Gas inlet 0° Gas inlet 90° Gas inlet 180° Gas inlet 270° Air inlet 0 ° Air inlet 0 0 Air inlet 0 0 Air inlet 0 ° Installation direction

Extflame-High-temperature burner Installation hole requirements Before installing the burner, leave holes in the furnace wall according to the size of the refractory brick. For the convenience of For installation, the opening size shall be greater than the outer diameter of refractory brick by at least 20mm, with the recommended opening size Do Range of (D + 20)o+8m m 0 The expansion gap shall be left between the protective cylinder and the rigid material of the furnace wall, and silicic acid shall be used Aluminum fiber cotton filled with plug. When the thickness of the furnace wall is greater...

Extflame-High-temperature burner • When the burner is stopped, if the temperature in the combustion chamber is higher than 500°C,a small amount of combustion-supporting air should be kept to reduce the burner temperature. • All installation, maintenance, ignition and setting must be operated by professional technical personnel in strict accordance with the latest local standards and norms. In order to avoid personal and property damage, please strictly observe the requirements in the operation manual. • The operator must wear appropriate protective clothing (shoes, safety helmet). • When the...