- Catalogs
- Shanghai DYD Industrial Equipment Co., Ltd.
- DYDTEC Pure Oxygen Burners for Glass Kilns-Oatomflame RM Series
DYDTEC Pure Oxygen Burners for Glass Kilns-Oatomflame RM Series
DYDTEC Pure Oxygen Burners for Glass Kilns-Oatomflame RM Series
- Power Range: 80 kW to 2300 kW, customizable.
- Applications: Suitable for fiberglass furnaces, non-ferrous metal smelting, and other industries.
- Efficiency: High thermal radiation efficiency and high flame temperature with adjustable flame length.
- Emissions: Low CO and NOx emissions.
- Turndown Ratio: 4:1.
- OatomF-RM-030: 70-300 kW
- OatomF-RM-080: 200-800 kW
- OatomF-RM-230: 600-2300 kW
- Natural Gas Flow: Ranges from 7 to 230 Nm³/h depending on the model.
- Gas Inlet Pressure: 5 to 50 kPa.
- Oxygen Inlet Pressure: 15 to 30 kPa.
- Oxygen Flow: 14 to 500 Nm³/h.
- Ensure the kiln wall has a pre-drilled hole at least 20mm larger than the nozzle brick.
- Use wedge-shaped refractory bricks to fill the gap for secure mounting.
- The nozzle brick is designed for easy maintenance.
- Quick-connect metal hoses are used for oxygen and gas connections.
- Adjustable inlets for fitting the installation.
- Customizable ignition gun to meet specific kiln needs.
Catalog excerpts
Oatomflame-RM Burner The Oatomflame-RM Series Oxygen-Fuel Burner is designed for glass and high-temperature furnaces, enhancing fuel combustion to significantly improve efficiency. Comprising a main burner and nozzle brick, it features flange connections for secure installation, quick clamps for easy assembly and disassembly, and an adjustable screw to fine-tune flame length for optimal furnace size and temperature distribution. With a long flame, wide coverage, and easy installation, it boosts productivity, saves energy, and reduces emissions. Power Range: 80 kW to 2300 kW, customizable Suitable for fiberglass furnaces, non-ferrous metal smelting, and other industries High thermal radiation efficiency High flame temperature with adjustable flame length Burner turndown ratio of 4:1 Low
Open the catalog to page 1
MAKE COMBUSTION PERFECT AND SIMPLE Model Definition OatomF-RM Burner Power (Customizable) Product Specifications Model Dimensions Main Dimensions Table (Unit: mm) Oxygen Inlet
Open the catalog to page 2
Installation Diagram 1. Before installation, ensure the kiln wall has a pre-drilled hole at least 20mm larger than the nozzle brick. 2. Fill the gap between the kiln wall and the nozzle brick with wedge-shaped refractory bricks for secure mounting. Furnace wall Tapered brick 3. The nozzle brick is embedded for easy maintenance. 4. The burner’s oxygen and gas connections use quick-connect metal hoses for easy installation. 5. The oxygen and gas inlets can be adjusted to fit the installation. 6. The ignition gun can be customized to meet the kiln's specific needs.
Open the catalog to page 3
4th Floor, Building 1, No. Ill, Zhiye Road, Pudong New Area, Shanghai Building 17, District 2, Loufeng Venture Capital Industrial Park, Suzhou Industrial Park Cheadle Royal Business Park, Cheadle, Cheshire SK8 3TD, U.K.
Open the catalog to page 4All Shanghai DYD Industrial Equipment Co., Ltd. catalogs and technical brochures
DYD product manual9 Pages
Extflame Burner8 Pages
- Actuator
- Electrically operated valve
- Electric actuator
- Gas solenoid valve
- 2-way solenoid valve
- Directional control valve
- Pressure limiter
- Direct-operated solenoid valve
- Digital temperature control
- Single-stage pressure regulator
- Heat exchanger unit
- Industrial pressure limiter
- Gas detector
- Protection relay
- Membrane regulator
- Temperature controller
- Metal pressure regulator
- Gas pressure limiter
- Digital temperature controller
- Pneumatic directional control valve