MAKE THE COMBUSTION PERFECT AND SIMPLE i mm Make The Combustion Perfect And Simple

DYDTEC Group is specialized in combustion industry. Our products and services include industrial burner, combustion system, flame treatment system, air heater, heat exchanger, project renovation for combustion safety, energy saving and low nitrogen, maintenance of combustion system. We see us as a solution provider in the combustion industry and can satisfy the needs from customers. Over 10 years expanding, DYDTEC has supplied thousand of combustion systems and air heaters. We have rich application experiences in various industries inctud- lotive, environment protection, industrial drying, light...

Tubflame/Tubrflame BURNER Tubflame/Tubrflame series burners are specially designed and developed by DYDTEC for the heating application of immersed tubes. The flame directly burns in the immersed tube inside the liquid tank to heat the liquid, with a thermal efficiency of more than 70%. This kind of equipment and its heating application have been used in automobile, electrical appliances and other industries for more than 40 years. Tubflame series adopts a mixed combustion head, which is suitable for immersion tube heating with a maximum conventional pipe diameter of 300mm and a maximum length...

Tubflame/Tubrflame Burner BURNER TYPE The high precision regulation ratio of Tubflame/Tubrflame burner is 40:1. If the control mode of two-stage flame and low regulation ratio is adopted, the condensate generated by the burner burning in the immersed tube will affect the thermal efficiency and the life of immersed tube.

Tubflame series is suitable for immersion tube heating with a maximum conventional pipe diameter of 300mm and a maximum length diameter ratio of 60:1. Tubrflame series is specially designed for heating small diameter immersed tubes, with a maximum diameter of 200mm and a maximum length to diameter ratio of 140:1.

Tubflame/Tubrflame Burner DN40 IMMERSION TUBE Note: 1) The left figure shows the influence of immersed tubes with different length and diameter ratio (L: D) on the thermal efficiency of the burner as the input power of the burner changes. 2) The left figure shows the performance curves of 70%, 75% and 80% efficiency. The slightly higher efficiency can be selected according to the figure, but the condensation of combustion products will cause problems. 3) Between (A) and (B-B), the length and diameter ratio of immersion tube of standard Tubflame burner can reach 40:1. 4) Between (B-B) and (C-C),...

1) The left figure shows the influence of immersed tubes with different length and diameter ratio (L: D) on the thermal efficiency of the burner as the input power of the burner changes. 2) The left figure shows the performance curves of 70%, 75% and 80% efficiency. The slightly higher efficiency can be selected according to the figure, but the condensation of combustion products will cause problems. 3) Between (A-A) and (B-B), the length and diameter ratio of immersion tube of standard Tubflame burner can reach 50:1. 4) Smaller diameter immersion tubes can be used in (B-B)&(C-C) areas. 5) Between...

1) The left figure shows the influence of immersed tubes with different length and diameter ratio (L: D) on the thermal efficiency of the burner as the input power of the burner changes. 2) The left figure shows the performance curves of 70%, 75% and 80% efficiency. The slightly higher efficiency can be selected according to the figure, but the condensation of combustion products will cause problems. 3) Between (A-A) and (B-B), the length and diameter ratio of immersed tube of standard Tubflame burner can reach 60:1. 4) Smaller diameter immersion tubes can be used in (B-B)&(C-C) areas. 5) Between...

1) The left figure shows the influence of immersed tubes with different length and diameter ratio (L: D) on the thermal efficiency of the burner as the input power of the burner changes. 2) The left figure shows the performance curves of 70%, 75% and 80% efficiency. The slightly higher efficiency can be selected according to the figure, but the condensation of combustion products will cause problems. 3) Between (A-A) and (B-B), the length and diameter ratio of immersion tube of standard Tubflame burner can reach 80:1. 4) Between (B-B) and (C-C), the length and diameter ratio of immersed tube...

Tubflame/Tubrflame Burner DN250 IMMERSION TUBE Note: 1) The left figure shows the influence of immersed tubes with different length and diameter ratio (L: D) on the thermal efficiency of the burner as the input power of the burner changes. 2) The performance curves of three different efficiencies are shown. The efficiency of 70%, 75% and slightly higher depends on the choice. 3) Between (A-A) and (B-B), the length and diameter ratio of immersed tube of standard Tubflame burner can reach 80:1. 1) The left figure shows the influence of immersed tubes with different length and diameter ratio (L:...

Tubflame SERIES BURNER BURNER TYPE

Tubrftame SERIES BURNER

Tubflame/Tubrflaine Burner I. The burner may be damaged during transportation and storage. Please check the equipment for physical damage before installation and use. If any damage is found, please contact the manufacturer in time; II. Please do not grab the burner through the pipe or valve, otherwise the valve fittings will be loosened or damaged, or the air leakage may occur in future use; III. Ensure that there is enough fresh air supply for combustion and ventilation, and ensure that the burner has enough space to ensure that the combustion air inlet is not blocked; IV. Avoid situations that...

1 T U MAKE the combustion perfect and simple DYDTEC COMBUSTION Tel: 86-21-58814568 Web: www.dydtec.com E-mail: [email protected] Add: Floor 1&4 of Building 1,No.Ill Zhiye Road Pudong District,China