Hatomflame Hydrogen Burner Hatomflame Gas Burner Is a high-precision temperature control burner designed for hydrogen fuel industrial applications. Hatomflame is a nozzle mixed hydrogen burner, which has the characteristics of high flame speed, stable power adjustment load, full combustion, stability and high heat transfer efficiency. The application range is very wide, such as chlor-alkali, lithium mining industry hot blast furnace, coating, industrial boiler, heat conduction oil furnace, rotary kiln drying, petrochemical heating furnace, waste gas waste liquid incinerator, solid waste treatment furnace, etc. Power range: 350kW-1200kW; Turndown ratio 10:1; Apply to the highest combustion chamber temperature of 1100℃; The maximum flame flow rate is 350 m/s; Preheated air can be used for the combustion support; Low CO and NOx emission; Double-fire inspection and safety online detection; Suitable for more than 99% pure hydrogen, high hydrogen fuel gas; Spark plug fires directly.

Hatomflame Hydrogen Burner » Model Definition More model parameters, detailed inquiry to DYDTEC Data determination conditions in the table: standard combustion chamber, hydrogen & combustion air temperature 20oC, 17% excess air, back pressure of combustion chamber OPa.

Hatomflame Hydrogen Burner Make The Combustion Perfect And Simple HatomFG Hydrogen burner can be applied in various high-temperature process occasions. The typical configuration of the single burner system is shown in the following figure. Combustion fan Air pipeline Control cabinet Main gas pipeline Ignition gas line *Nitrogen gas line (Not shown) 1) Medium speed / high speed selection: Medium speed: the flame length is long, and the combustion-supporting air pressure difference is low High speed: the flame length is shorter, the combustion supporting air pressure difference is higher, which can form...

Hatomflame Hydrogen Burner 7) Standare UV mounting port R1 / 2" 9) Gas pressure gauge port Rp 1 / 4"

Hatomflame Hydrogen Burner Make The Combustion Perfect And Simple 1）Requirements for the burner installation hole: ② Mounting pad ③ Installs studs ④ Furnace wall mounting plate Side length of firebrick The length of standard burner brick is 232mm. When the thickness of the furnace wall is greater than the length of the refractory brick, keep the 30° Angle of the horn mouth (as shown on the right picture) to better protect the furnace wall. Mounting hole size D0 Before installing the burner, open the square holes in the furnace wall according to the size of the refractory brick. For installation,...

Hatomflame Hydrogen Burner Make The Combustion Perfect And Simple Main accessories Hydrogen nozzle (axial) Hydrogen nozzle (radial) Application burner Suitable for the whole series Suitable for the whole series Suitable for the whole series * — If you need to customize other specifications of the burning mouth brick, please consult the supplier. Shanghai DYDTEC Combustion Equipment Co., Ltd. Address:1 F, 3rd Building, 1/4 F, 1st Building, No.111, Zhiye Road Pudong District, Shanghai,China +86 400 606 8918 [email protected] export.dydtec.com