DYDTECCQM3USTION MAKE THE COMBUSTION PERFECT AND SIMPLE

DYDTEC Group is specialized in combustion industry. Our products and services include industrial burner, combustion system, flame treatment system, air heater, heat exchanger, project renovation for combustion safety, energy saving and tow nitrogen, maintenance of combustion system. We see us as a solution provider in the combustion industry and can satisfy the needs from customers. Over 10 years expanding, DYDTEC has supplied thousand of combustion systems and air heaters. We have rich application experiences in various industries includ- omotive, environment protection, industrial drying, light...

Linofire Direct-fired Heating Burner Linofire serie burners are designed to heat fresh air, medium & low-temperature air (direct-fired). They are used for processes such as heating, drying or curing for the environment or objects in automotive, medical, food and chemical industries. The burners may also be installed at downsteam or preheating section to ensure higher heating temperature. • Designed for direct-fired air heating and medium/low temperature drying • Short flame length (max. length: 1000mm)

Linofire Series Linear Burner ///////A Linofire Series Burner

r/////// Linofire Series Linear Burner Application Typical low-temperature applications include AC. heating for painting process, AC heating for general buildings, AC heating for central-station AC heaters, channel heaters, grain drying, malt drying etc. Typical air heating applications for the high-temperature process include the air dryer, chemical dryer, fresh air heating cabinet, bake & curing, metal part modeling, and all applications that heat fresh air to 500°C. Combination methods for burners can be selected based on site conditions for the applications listed above. Topical combinations...

Linofire Series Linear Burner ///////A CO emission concentration of burner at 240kW/ft, 250Pa Relationship between burner output Relationship between burner output N02 emission concentration of power and air pressure drop power and fuel gas pressure drop burner at 240kW/ft, 250Pa

r/////// Linofire Series Linear Burner GENERAL REQUIREMENTS

• When arrange burners based on customer needs, make sure the maximum number of modules connected at each air inlet meets the requirements listed below to ensure even distribution of combustible gases. Accessories Gas Inlet Position • Notes: Unused interfaces on the plate at the ignition side must be sealed using plugs.

IT LJ MAKE THE COMBUSTION PERFECT AND SIMPLE DYDTEC COMBUSTION Tel: +86 4006068918 Web: www.dydtec.com E-mail: [email protected] Add: Floor 1&4 of Building 1,No.Ill Zhiye Road Pudong District,China