MAKE THE COMBUSTION PERFECT AND SIMPLE

DYDTEC Group is specialized in combustion industry. Our products and services include industrial burner, combustion system, flame treatment system, air heater, heat exchanger, project renovation for combustion safety, energy saving and low nitrogen, maintenance of combustion system. We see us as a solution provider in the combustion industry and can satisfy the needs from customers. Over 10 years expanding, DYDTEC has supplied thousand of combustion systems and air heaters. We have rich application experiences in various industries including automotive, environment protection, industrial drying,...

Linofire-WB serie burner is the direct-fired air heating burner designed based on the safety standard EN746-2 of the EU gas industry. The Linofi re-WB burner can be installed on the side wall of the furnace to produce a wide range of flame heating area in a short period of time and can be used in a variety of low and medium temperature heating application scenarios such as oven, industrial drying furnace and air heater, especially suitable for working conditions with limited heating space. • 6 types of specifications optional; all-metal structure • Stable and clean combustion; low NOx level •...

Linofire-WB Series Burner ///////A

y/////// Linofire-WB Series Burner (0 Linofire-WB burner is suitable for a variety of heating scenarios at a low temperature. The appropriate application method can be selected according to conditions. TYPICAL INTEGRATED APPLICATION APPLICATION TYPE Application Requirements for working conditions Schematic diagram Vertical duct application Elbow duct applications Requirement for pipe installation on the burner: L > 1.5 m The distance between the edge of the burner nozzle and other directions of the inner duct wall shall not be less than 0.5 m Requirement for pipe installation on the burner: L...

Linofire-WB Series Burner ///////A Data curve CO emissions (under the conditions of 15% 02 / 2mbar of combustion air pressure) (under the conditions of 15% 02 / 2mbar of combustion air pressure)

V////// Linofire-WB Series Burner Dimen/ion/ Dimensions (Unit: mm) Repeat feature (Unit: set)

Linofire-WB Series Burner Before installing the burner, square holes should be drilled on the furnace wall based on the size of burner nozzle. In convenience of installation, the hole size must be at least 12mm larger than the side length of the burner nozzle. The recommended range of the hole size Fo is(F+12)*o mmD When the thickness of the furnace wall exceeds the length of the burner nozzle, the bell mouth (as shown in the right figure) at an angle of 45° to the horizontal should be reserved on the end face within the furnace wall that exceeds the burner nozzle so as to better protect the...

/////// Linofire-WB Series Burner

MAKE THE COMBUSTION PERFECT AND SIMPLE Tel: 86-21-58814568 Web: www.dydtec.com E-mail: [email protected] Add: Floor 1&4 of Building 1,No.Ill Zhiye Road Pudong District,China