Structural Drawing Brief Description Widely used in Crushing Plants in the Quarrying and Mining industries, Vibrating Feeders are used in applications ranging from the feeding of raw quarry material to a Primary Crushing section, or the feeding of smaller material to a Secondary or Tertiary crushing section. Smaller suspended Vibrating Feeders are commonly used for feeding product material from bin compartments onto conveyors or in surge pile applications. Main Technical Parameters Eccentric shaft rotation speed (r/min) Motor power Weight(t) Dimension • The ZSW models are generally used for feeding large lump size raw quarry material to the Primary Crusher. These feeders are activated by twin eccentric shafts, and are available in 6 models. Feed lump sizes of up to 1200mm and capacities of up to 1000TPH are available.These feeders have a scalping section at the discharge end of the unit. • The GZD models are generally used for Secondary and or Tertiary feed applications, and are activated by twin vibrating electric motors mounted on each side of the frame. There are 3 models available, with feed lump sizes of up to 450mm and capacities of up to 140 TPH. These feeders have a 2 section step deck scalping section at the discharge end of the unit. • The GZG model is a smaller type of suspended feeder which is mainly used for feeding regulated flow rates of product material from storage bins onto conveyors in a Blending Plant, or in an underground Surge Tunnel application.