Danmajet Digital Tech Co.,Ltd MT-200 Automatic Round Bottle Labeling Machine Operation Manual No. 459, Dongzhou Rd., Dongjing Town, Songjiang, Shanghai 201619, China

• Overview and Outline of the Product • Main Technical Parameters • Operational processes • Device Labels • The Main Adjustment of the Components • Boot Check • Common Breakdowns and Exclusion of Breakdowns • Packaging & Transportation

1. Overview and Outline of the Product MT-200 Labeling Machine is mainly composed of a host, spoke, sub bottles, a conveyor and so on. The transmission of the bottles can be controlled through the touch screen, the coming out of labels can be controlled by photoelectricity and the labels are affixed through the spoke. The great advantage is that each drive part is controlled by separate electric machinery, which is durable and easy to adjust.

2. Main Technical Parameters Production capacity Labeling precision Qualified rate Product applicable Label applicable

Function key for switching, if the button is pressed on the labeling, when the photoelectric detects the bottle, the step motor will work. If the button is pressed on the non-labeling, even if the photoelectric detects the bottle, the step motor will not work. The button can change the speed of labeling, which changes the running speed of step motor, adjustment should match the speed of conveyor belt and the spokes; The button can adjust the length of labels; it changes the position that the labels remain on the board. Generally the label should be 2mm more than spin-off board. When the photoelectricity...

7, printing control switch-type button, a click for printing and another click for non-printing.

Device labels Host height adjustment Start conveyor belt Labeling trial Proofreading of labeling position and adjustment of labeling accuracy Formal labeling Abnormal message Work completed? Exclude abnormal

By adjusting the auger of host, the height of host changes, through the adjustment of this part, the label’s position on the bottle will be changed. Open the front cover of feed, put the labels in the label tray to confirm the positive and negative direction of the labels, hang them up properly, and then covered the front cover. Make sure that the label is 2mm more than spin-off board by adjusting the position before and after photoelectricity.

a) After the installation of the host, adjust screws of the 4 feet of the machine to make the host horizontal. b) The structure, working principle and adjustment methods of the machine must be understood and mastered. c) Check whether the mechanical parts are simultaneous, situation of the lubrication in each transmission part, make sure the oil is plentiful. d) The machine can be put to normal use after running for half an hour with no anomalies. a) Check the power supply, voltage 220V 50Hz b) Access to power supply, touch screen light up. c) Check the suitability of each parameter, use manual...

10. Common Breakdowns and Exclusion of Breakdowns Equipment packaging should be sealed. all components must be firmly fixed, the bottom of packing box must be solid. Hoisting of equipment must be correct, avoid being placed it side or upside down. It should be removed by forklift from the bottom. packing box should be put upright; the bottom should have a close meet with the floor of the truck.