Acousto-optic driving power (Fixed frequency) Small size, fast response time, high on-off ratio, low noise • The acousto-optic driver is an RF driver that provides supporting functions for acousto-optic device products. It is suitable for acoustooptic modulators and frequency-shifting products with a driving power of less than 3W. The RF driver generates an RF signal, which is used to generate sound waves in the crystal of the AO device. The frequency and strength of the RF signal determine the degree to which the beam is modulated, deflected or tuned. The acousto-optic driving power supply has the characteristics of fast response speed, good reproducibility, high frequency accuracy, low frequency noise and high on-off ratio. At the same time, the acousto-optic driving power supply has a good heat dissipation structure and is more temperature stability during operation. Applications: Acousto-optic devices such as AOMs, Q switches, AODs, and AOTFs. Small size, fast response time, high on-off ratio, low noise The variable frequency acousto-optic driver is based on direct digital frequency synthesis (DDS) technology, and uses MCU as the main controller to achieve the frequency sweep output of the RF signal. The working mode and frequency sweep parameters can be flexibly configured through the host computer software, and the gain flatness is good within the sweep bandwidth. It can also be configured as a point frequency modulation mode. The variable frequency acousto-optic driver power supply is a radio frequency driver that provides supporting functions for acousto-optic device products, and is suitable for acousto-optic devices with frequency sweeping requirements. (j Applications: Acousto-optic devices such as AOMs, Q switches, AODs, and AOTFs. Operating mode Configurable parameters Sweep waveform Initial frequency Cutoff frequency Sweep mode Stepped frequency Output power