Waste Water Treatment Vehicle Blower USA-tech MBseries

Product catalog summary

Overview: The document provides detailed specifications and performance data for the MB Series Bi-lobe Positive Displacement Blowers and Vacuum Pumps. It includes information on pressure and vacuum performance across different models and operational conditions.

Pressure Performance: The pressure performance section outlines the capabilities of various MB Series models (30, 45, 60) at different speeds (RPM) and pressure levels (PSIG). Key parameters include:

CFM (Cubic Feet per Minute): Indicates the volume of air moved by the blower.
BHP (Brake Horsepower): Represents the power required to operate the blower.
Temperature (°F): Shows the temperature rise associated with different pressure levels.

Each model's performance is detailed for speeds ranging from 2000 to 5000 RPM and pressures from 4 to 15 PSIG.

Vacuum Performance: This section provides vacuum performance data for the same MB Series models. The parameters measured include:

CFM: Volume of air moved under vacuum conditions.
BHP: Power required for vacuum operation.
Temperature (°F): Temperature changes under vacuum conditions.

Performance is detailed for speeds from 1500 to 4000 RPM and vacuum levels from 4”Hg to 15”Hg.

Notes: The performance ratings are based on standard conditions, including an inlet air pressure of 14.7 psia, a temperature of 68°F, and a specific gravity of 1.0 for pressure performance, and a discharge of 30" Hg for vacuum performance.

Catalog excerpts

Waste Water Treatment Vehicle Blower USA-tech MBseries-1

MB Series Bi-lobe Positive Displacement Blower & Vacuum Pumps

Open the catalog to page 1

Waste Water Treatment Vehicle Blower USA-tech MBseries-2

Pressure Performance : MB Series 30, 45, 60 MB Series 30 MODEL Notes: Pressure ratings based on inlet air at standard pressure of 14.7 psia,standrad temperature of 68ºF,and speci

Open the catalog to page 2