Shandong Tianli Energy Co., Ltd. Steam Rotary Dryer Equipment Introduction The steam rotary drying/calcining machine is equipped with a steam heating pipe in the traditional rotary dryer. The heating pipe runs through the whole dryer and rotates with the cylinder. The material entering the rotary cylinder is lifted and stirred by the heating pipe in the rotating drum, and dried/calcined by the heat provided by the heating pipe. The dried/calcined product is moved from the higher end to the lower end by the inclination of the drying/calcining machine and discharged from the discharging opening at the lower end. And the vaporized water is discharged under the action of the fan. For the organic solvent, a closed type steam rotary drying/calcining machine can be used, and the organic solvent is recovered by circulating the inert gas to prevent explosion. Performance Characteristics 1. The required heat is mainly provided by the built-in heat exchange tube, and the energy saving effect is remarkable. 2. The processing capacity is large, single machine can reach 200t / h. 3. The equipment has good sealing performance, suitable for the recovery of organic solvents. 4. The structure is simple, easy to operate, low maintenance cost. 5. Good sealing, no dust leakage, less environmental pollution.

Suitable for material drying using steam as heat source. Such as: polyethylene (PE), terephthalic acid (PTA), polyoxymethylene (POM), ABS resin, gypsum, copper fine powder, iron fine powder, coal powder, activated carbon, soda ash, coal slime, potassium carbonate and fluorite powder, etc.