Shandong Tianli Energy Co., Ltd. Spin Flash Dryer Equipment Introduction The clean thermal medium heated by the heat source enters the drying chamber in a tangential form, forming a powerful vortex swirling airflow with the mechanical agitation mechanism. The wet material is metered into the drying chamber by a feeder, pulverized and dried by stirring and vortex flow. The top of the drying chamber is set with a particle size classifier. The fine powder that meets the drying requirements is discharged from the top of the tower and collected by the latter separator. The larger particles that do not meet the drying requirements are blocked by the classification ring, returned to the drying chamber, and continue to be pulverized and dried. After drying to qualified product, it is discharged out the drying chamber with hot air and collected by a separator. The clean exhaust gas is emptied by the induced draft fan. Performance Characteristics 1. It integrates drying and crushing together, and realizes the paste-like and filter cake-like materials to be quickly dried into powder at one time. 2. Short heat and mass transfer time, fast drying speed, suitable for heat sensitive materials. 3. Large drying strength, high thermal efficiency, and small equipment volume. 4. The structure of the dryer is reasonable, and the installation and maintenance are convenient and simple.

Has been widely used in fine chemicals, dyes, pesticides and intermediates, food and metallurgy ore industry. Such as magnesium hydroxide, aluminum hydroxide, alumina, molecular sieve, 4A zeolite, white carbon black, dibasic acid, mancozeb, silica gel, stearate, various carbonates, various heavy metal salts, etc.