Shandong Tianli Energy Co., Ltd. Rotary Dryer Equipment Introduction The rotary dryer is mainly composed of a rotating body, a lifting plate, a transmission device, a supporting device and a sealing ring. The dryer is a cylinder that is slightly inclined from the horizontal direction. The material is added from the higher end ， The high-temperature heat source and the material parallelly flow or counter-flow into the cylinder. As the cylinder rotates, the material runs to the lower end. The lifting board on the inner wall of the cylinder lifts up and drops down the material, so that the contact surface of the material and the air flow is increased to increase the drying rate and promote the advancement of the material. The dried product exits the dryer from the lower end. Performance Characteristics 1. The dryer has large processing capacity, low fuel consumption and low drying cost. 2. High temperature resistant, can be quickly dried using high temperature hot air. 3. Strong extensibility，the production margin is considered during design. 4. Wide range of application high hock-resistibility, stable running of cylinder, high reliability.

Widely used in chemical, mining, metallurgy, agriculture, feed, fertilizer and other industrial fields. Such as ore, slag, coal, metal powder, diatomaceous earth, kaolin, starch residue, distiller's grains, dregs, soy sauce residue, fertilizer, potassium chloride, potassium sulfate, etc., sludge, aquatic product waste, food factory waste, phosphorus fertilizer sulfur Ammonium, light calcium carbonate, clay, lime slurry, ore mud, phosphate rock slag, aluminum plant red mud.