Shandong Tianli Energy Co., Ltd. Fluidized Bed Dryer Equipment Introduction The fluidized bed is divided into the upper and lower bed body, air distributor, the inlet and outlet ports, etc., and the wet material entering the fluidized bed is in contact with the hot air above the air distribution plate, and the material particles are suspended in the air flow to form a fluidized state. The material and the hot air are heat-exchanged and dried, and the finished product is discharged from the discharge port of the fluidized bed, and the dust-containing gas is purified by the dust collecting device and then discharged into the atmosphere by the induced draft fan. Performance Characteristics 1. Self-cleaning, anti-material leakage, simple structure of air distribution plate. 2. Integration of drying and cooling bed, small floor space, low investment. 3. Uniform contact of the two-phase of gas and solid, high thermal efficiency. 4. Stable operation and high automation. 5. Without rotating parts and vibrating parts, low maintenance costs, long service life.

Widely applied in chemical, pharmaceutical, food, feed, industrial and municipal sludge treatment industries. Example: sodium bicarbonate, alum, potassium chloride, magnesium sulfate, feed yeast, adipic acid, ammonium nitrate, calcium chloride, calcium hypochlorite, potassium carbonate, potassium sulfate, sodium carbonate, sodium metasilicate, potassium nitrate, PVC, CPE, PC, etc.