Specifications:
The SR18M Roller is equipped with a YC6108ZG engine model, delivering a rated power of 110 kW. It has an operating weight of 18 tons. The dimensions are 5990 mm in length, 2345 mm in width, and 3215 mm in height. The roller features a mechanical transmission with a single driving axle and a wheel deceleration system.

Travel Speed:
The roller has three forward gears with speeds ranging from 0-2.2 km/h, 0-4.3 km/h, and 0-9.1 km/h, and two reverse gears with speeds of 0-2.2 km/h and 0-4.3 km/h.

Engine:
The engine model is SR18M with an operating weight of 18 tons. The weight distribution is equal between the front and rear wheels, each weighing 9 tons. The front wheel diameter is 1550 mm with a width of 2140 mm. The rear tire width is 23.1 mm, and the air pressure ranges from 0.18 to 2.10 MPa.

Performance:
The roller generates a centrifugal force of 335/190 kN and operates at a vibrating frequency of 30 Hz. It has a theoretical amplitude of 2.0/1.0 mm. The driving type is mechanical, while the vibration and steering drive types are hydraulic. It has a minimum turning radius of 6.1 meters and a climbing ability of 30%. The static linear load is 420 N/cm, with a minimum ground clearance of 395 mm and a wheelbase of 3140 mm. The maximum steering lock angle is 36 degrees, and the vertical oscillation is 15 degrees.

Main Features:
The SR18M Roller is powered by an advanced YUCHAI YC6108G diesel engine, known for its power, reliability, and environmental protection. It includes a full hydraulic steering system, articulated frame, and a vibrating roller with a new structure for enhanced performance. The brake system consists of an air-assisted oil disc type service brake and a mechanical control parking brake.

Contact Information:
Shandong Shantui Construction Machinery IMP&EXP Co., Ltd. is located at No.71 East Wutaizha Road, Jining, Shandong, China. They can be contacted via phone at +86-537-2909367 or email at [email protected]. More information is available on their website: www.shantuichina.com.