Engine Specifications:
The bulldozer is equipped with a Cummins KTA19-C525 engine, featuring an in-line, water-cooled, 4-cycle, turbocharged, intercooled, direct injection system. It has a rated power of 310 kW (420 HP) at 2000 rpm, with a maximum torque of 1900 Nm at 1400 rpm. The engine has six cylinders with a bore and stroke of 150 mm each, a piston displacement of 15.9 liters, and a minimum fuel consumption of 214 g/kW.h.

Power Transmitting System:
The system includes a 3-element, 1-stage, 1-phase torque converter and a forced connected planetary gear transmission with electric and hydraulic control. The main drive uses a spiral bevel gear with splash lubrication, while the steering clutch is wet, multi-disc, spring-loaded, and hydraulically separated with electric and hydraulic control. The steering brake is wet and floating, with hydraulic assistance and electric and hydraulic control. The final drive consists of a 1-stage spur gear and 1-stage planetary speed reduction with splash lubrication.

Undercarriage System:
The bulldozer features a K-type elastic suspended structure with two carrier rollers and seven track rollers on each side. The track type is a link master, seal, lubricated type with 41 links per side. The width of the track shoes is 610 mm, and the pitch is 260.35 mm. The maximum pressure is 21 MPa, and the pump type is a working pump and PPC tandem pump.

Blade Specifications:
The bulldozer is equipped with a Semi-U Blade with a dozing capacity of 16 m³. The blade width is 4315 mm, and the height is 1875 mm. It can drop a maximum of 700 mm below ground and has a maximum tilt adjustment of 400 mm. The blade weight is 5200 kg.

Ripper Specifications:
The single ripper has a maximum digging depth of 1400 mm and can lift up to 1130 mm above ground. The weight of the single ripper is 5017 kg.

Travel Speed:
The bulldozer has three forward gears with speeds ranging from 0-3.7 km/h, 0-6.8 km/h, and 0-12.2 km/h. In reverse, the speeds are 0-4.4 km/h, 0-8.2 km/h, and 0-14.8 km/h.

Overall Dimensions:
The document does not provide specific overall dimensions, but it includes detailed specifications for various components and systems.

Contact Information:
Shandong Shantui Construction Machinery IMP&EXP Co., Ltd. is located at No.71 East Wutaizha Road, Jining, Shandong, China. Contact numbers are +86-537-2909367, 2909368, 2909369, 2909370, and the fax number is +86-537-2311219. Email: [email protected], Website: www.shantuichina.com.