Engine Specifications:
- Model: Cummins NT855-C280 BCIII
- Type: In-line, water-cooled, 4-cycle, overhead valve direct injection, turbocharged diesel
- Rated Power: 169 kW (230 HP) at 2000 rpm
- Cylinder: 6 cylinders with bore x stroke of 139.7 x 152.4 mm
- Piston Displacement: 14010 ml
- Minimum Fuel Consumption: 217 g/kW.h
- Maximum Torque: 1036 N.m at 1400 rpm

Power Transmission System:
- Torque Converter: 3-element, 1 stage, 1 phase
- Transmission: Planetary gear, multi-disc clutch, hydraulically connected, forced lubrication
- Main Drive: Spiral bevel gear, splash lubrication, single-stage speed reduction
- Steering Clutch: Wet, multi-disc, spring-loaded, hydraulically separated, hydraulic control
- Steering Brake: Wet, floating, direct on-off hydraulic inter-linking operation
- Final Drive: 2-stage speed reduction of spur gear, splash lubrication

Undercarriage System:
- Type: Swing type of sprayed beam, suspended structure of equalizer bar
- Carrier Rollers: 2 each side
- Track Rollers: 7 each side (single flange 5, double flange 2)
- Track Type: Assembled single-tooth shoes (39 each side)
- Width of Track Shoes: 560 mm
- Pitch: 216 mm

Hydraulic System:
- Max Pressure: 19.1 MPa
- Pump Type: Gear pump
- Discharge: 194 L/min at 2000 rpm
- Bore of Working Cylinder: Ø110 mm, 2 double-acting type

Travel Speed:
- Forward: 1st gear 0-3.8 km/h, 2nd gear 0-6.8 km/h, 3rd gear 0-11.8 km/h
- Reverse: 1st gear 0-4.9 km/h, 2nd gear 0-8.5 km/h, 3rd gear 0-14.3 km/h

Blade Specifications:
- Types: Straight-tilt, Angle, U-Blade
- Dozing Capacity: 7.8 m³ (Straight-tilt), 5.4 m³ (Angle), 8.4 m³ (U-Blade)
- Efficiency: 330 m³/h (Straight-tilt), 245 m³/h (Angle), 365 m³/h (U-Blade)
- Blade Width: 3725 mm (Straight-tilt), 4365 mm (Angle), 3860 mm (U-Blade)
- Blade Height: 1395 mm (Straight-tilt), 1107 mm (Angle), 1379 mm (U-Blade)
- Max Drop Below Ground: 540 mm (Straight-tilt & U-Blade), 560 mm (Angle)
- Max Tilt Adjustment: >1210 mm (Straight-tilt & U-Blade), >1240 mm (Angle)
- Weight of Blade: 2900 kg (Straight-tilt), 3372 kg (Angle), 3350 kg (U-Blade)

Ripper Specifications (Optional):
- Max Digging Depth: 666 mm (3-Shank), 695 mm (Single)
- Max Lift Above Ground: 555 mm (3-Shank), 515 mm (Single)
- Weight: 2495 kg (3-Shank), 2453 kg (Single)

General Specifications:
- Operating Weight: 24.6 t
- Min Ground Clearance: 405 mm
- Ground Pressure: 0.078 MPa
- Min Turning Radius: 3.3 m
- Gradeability: 30°
- Track Gauge: 2000 mm

Contact Information:
- Address: No.71 East Wutaizha Road, Jining, Shandong, China
- Tel: +86-537-2909367/8/9/70
- Fax: +86-537-2311219
- Email: [email protected]
- Website: www.shantuichina.com