*mydirectindustry

Catalogs
SHANDONG SHANTUI CONSTRUCTION MACHINERY IMP&EXP CO
Bulldozer series SD16

Bulldozer series SD16

Product catalog summary

Engine Specifications:
The SD16 Bulldozer is equipped with a Shangchai C6121/Steyr WD615T1-3A engine, delivering a rated power of 120 kW (160 HP). It features a water-cooled, inline, 4-stroke direct injection system with six cylinders, each with a bore and stroke of 126mm x 130mm. The engine's piston displacement is 9.726L, with a minimum fuel consumption of 214g/Kw.h and a maximum torque of 764N.M.

Transmission System:
The bulldozer uses a 3-element, 1 stage, 1 phase torque converter and a planetary gear type transmission with power-shift and forced lubrication. The main drive consists of a spiral bevel gear with single-stage speed reduction.

Steering and Braking:
The steering clutch is a wet, multi-disc, spring-loaded system, hand hydraulically separated and interlinked with the steering brake. The steering brake features a wet, floating band structure with a foot brake and hydraulic booster.

Final Drive:
The final drive is a two-stage speed reduction of spur gear with splash lubrication.

Undercarriage System:
The bulldozer has a sprayed beam, suspended structure of equalizer type with two carrier rollers and six track rollers on each side. The track type is assembled, single-tooth with a track shoe width of 510mm and a pitch of 203.2mm.

Hydraulic System:
The hydraulic system operates at a maximum pressure of 14MPa, using a gear pump with a discharge rate of 243L/min. The working cylinder bore is 110mm with two cylinders.

Travel Speed:
The bulldozer's travel speed varies across three gears: Forward speeds are 0-3.29 km/h, 0-5.28 km/h, and 0-9.63 km/h, while reverse speeds are 0-4.28 km/h, 0-7.59 km/h, and 0-12.53 km/h.

Blade Specifications:
The SD16 offers different blade types: Straight-tilt, Angle, and U-Blade. The dozing capacity ranges from 4.4 to 5.0 m3, with blade widths from 3388mm to 3970mm and heights from 1090mm to 1149mm. The maximum drop below ground is 530mm to 540mm, with a tilt adjustment of up to 400mm.

Ripper Specifications:
The 3-Shank Ripper has a maximum digging depth of 572mm, a maximum lift above ground of 592mm, and weighs 1710kg.

Overall Dimensions and Performance:
The bulldozer has a minimum ground clearance of 400mm, ground pressure of 0.067 MPa, a minimum turning radius of 4.5 to 4.9 meters, and a gradeability of 30 degrees. The track gauge is 1880mm.

Contact Information:
Shandong Shantui Construction Machinery IMP&EXP Co., Ltd. is located at No.71 East Wutaizha Road, Jining, Shandong, China. Contact numbers are +86-537-2909367 to 2909370, with a fax number of +86-537-2311219. Email: [email protected], Website: www.shantuichina.com.

Catalog excerpts

SD16 Bulldozer Engine model: Shangchai C6121/Steyr WD615T1-3A Rated power: 120 kw (160 HP) Operating weight: 17 t

Open the catalog to page 1

All SHANDONG SHANTUI CONSTRUCTION MACHINERY IMP&EXP CO catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list