MC Series Light Curtain
12Pages

MC Series Light Curtain Please read this document carefully and thoroughly before installation and operation because the correct and optimum use of this product is important for the personal safety. Please give the user this document with the photoelectric protector if you are an agent, a dealer or a machine manufacturer which forms a complete set, because this document is important to guide the user correctly to install and operate. Shandong Laien Optic-electronic Technology Co.,Ltd

Basic Instruction 1.Usage 1. MC light curtain is mainly used for mechanical processing equipment, hazardous work places, machinery and equipment to prevent injury to the operator and suffering injury or accident by into the dangerous region, to protect personal safety. 2. MC light curtain is to be used alone or matching with safety modules,such as the safety relay,emergency stop switch etc. to form more complex control system for the alarm intruding into the dangerous areas or equipments protection system interlock. 2. Features 1.Slim and Exquisite profile,installation with ease...

Operating Power Power Consumption Ambient Temp. Response Time Insulation Resistance Dielectric Strength Anti-interference to Light 10000Lux(incidence angle≥5°) Light Source Sensor:aluminum alloy Protection Range Protection Height 4.Specification It consists of three parts which separated by"-",the first part means the NO. of light beams,the second means light pitch,third part means the output type,please remark it in order if the special contro

N ---NPN output P --- PNP output D --- NPN, PNP output each Light axis pitch: 10—10mm; 20—20mm 40—40mm; 80—80mm Beams: 04、08、12、16…… 5. MC light curtain I/O 1. PNP Output I/O Wiring

Mark: the adjustable pulse-inversion test to meet special loading requirements from customer. 4. NPN Output Wave Type Mark: the adjustable pulse-inversion test to meet special loading requirements from customer.

6. Controller Specification There are 4 kinds of controller as below for your options SR4P2A1B24N 、 SR4P2A1B24P 、 SR4P3A1B24 、 ND controller,the detailed usage and wiring in the corresponding instruction manual. Please contact us for more information. 7. Peripheral Reflecting Surface Influence If it has the smooth reflecting surface around the light curtain, like the metal plate, the floor, the ceiling, the work piece, the cover, the partition board, the glass plate and so on, the protector placement position must be away from the reflecting surface farther than value A (m), value A can be...

A. The smooth reflecting surface around the light curtain, can cause the protector to lose the normal function, further to lose the protective function. B. The placement position of the protector, must be as far as possible away from the reflecting object, or cover up the reflecting object, eliminates the disturbance around the light curtain, guarantee the security. 8.MC light curtain installation&parts(unit:mm) 1.Right-angle bracket installation 1 2. Right-angle bracket installation 2 Mark: If any special bracket,please contact us.

Should do check carefully the same after finishing wiring to ensure of correct connection. Don't provide power till everything is going well. 1. Debugging ①check power supply To ensure the voltage same as that marked,tolerance:±15% ②power on To connect as per instruction and check carefully before power on ③alignment Adjust sensor's position and angle to make green light off and red light on ④test To interrupt each beam in turn to ensure device runs well, Light interrupting,red light on,green light off Light passing:red light off,green light on ⑤mounting position To ensure of the light...

2.Operation,Check and Maintenance ①.Notice 1.Before put into operation ,check the protector to ensure that it runs normally. 2.During operation, do not change the position of light curtain. 3.When a malfunction happened, only professional technicians are allowed for repairing. 4.Before replacing or installing protector and transmitting wires cables, power to protector should be switched off. It is operated only by professional technicians. 5.During operation, do not let work pieces, tools or waste matters hit the protector. ②.Check and Maintenance It is important to check and make...

The protector does not work, various indicators Solution Inspect the power source and the wiring, provide the correct power source. The wiring of control cable is not good; intermittently, flicker. indicators The light curtain is not aiming correctly Adjust the light curtain again. The protector output control wire OSSD1 Wiring again and right. display normally, but the press can not run normally. and OSSD2 are broken with the press control unit. The press control unit has a fault. Examine the press control unit. Consult form 8.2 simple troubles of controller 2. Short circuit OSSD1, Short...

SHANDONG LAIEN OPTIC-ELECTRONIC TECHNOLOGY CO., LTD. West Shanbo Road, RenCheng Economic Development Zone, Jining, Shandong, 272000, China Tel: +86-537-3926517 Fax: +86-537-3926519 Http: //www.laien.cn E-mail: laientech@laien.cn