12V30Ah Battery Pack Specification120602 - 9 Pages

Add to MyDirectIndustry favorites
12V30Ah Battery Pack Specification120602

Catalog excerpts

HETER Electronics Group Product Specification Lithium-ion Rechargeable Battery Pack Product Name LiFePO4 Li-ion Battery Pack Product Specification 1 Security rating□Top secret□Confidential □Secret□Ordinary PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

 Open the catalog to page 1

HETER Electronics Group Product Specification 3. Battery Pack Specifications 5. Appearance And Delivery Condition 6.Standard Test Conditions 7.Characteristics 2 Security rating□Top secret□Confidential □Secret□Ordinary PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

 Open the catalog to page 2

HETER Electronics Group Product Specification This specification describes the type and size, performance, technical characteristics, warning and caution of the HETER-12V/30Ah LiFePO4 rechargeable pack.The specification only applies to HETER-12V/30Ah LiFePO4 pack supplied by HETER ELECTRONICS GROUP CO.,LTD. 2. Product and Model 2.1 Product: Lithium-ion Battery Pack 2.2 Model: 2.3 Picture And Output Wire Positive output wire Negative output wire 3 Security rating□Top secret□Confidential □Secret□Ordinary PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

 Open the catalog to page 3

HETER Electronics Group Product Specification 3. Battery PackSpecifications Items Nominal voltage Typical capacity Minimum capacity Most continuous discharge current Over current protection Discharge cut-off voltage Over discharge protection (recommended value) 9.6-10V Charge voltage Charge current Use a constant current, constant voltage(CC/CV) lithium-ion (Li+) battery charge controller. Inner resistance Charge mode: CC/CV Between positive and negative polar of discharge port Operation temperature range Discharge: Storage temperature range 0℃40℃ at half charged state Storage environment...

 Open the catalog to page 4

HETER Electronics Group Product Specification Standard Charge mode Single cell Charge balance Voltage Single cell balance current Over current protection Over discharge protection delay Over current protection delay Over current release Over current protection current Over discharge protection Over charge protection delay time Over discharge release voltage Over discharge protection voltage Over charge protection Over charge release voltage Over charge protection voltage Self-discharge current Max continuous charge current/discharge current 5 Security rating□Top secret□Confidential...

 Open the catalog to page 5

HETER Electronics Group Product Specification Short circuit protection Short circuit protection delay time Release condition Inner resistance MOSFETProtection circuitMOSFET Working temperature range 8 Outside short circuit <600us Cut off Loading, release automatically ≤20mΩ -20℃-80℃ Storage temperature range Temperature protection 5.Appearance And Delivery Condition There shall be no such defects as scratch, discoloration, leakage which may adversely affect commercial value of the cell. About 80%~90% charged (after discharged, use the charger to charge about 4~5 hours). 6. Standard Test...

 Open the catalog to page 6

HETER Electronics Group Product Specification in an ambient temperature of 25ºC ±2ºC under a humidity of 65±20%, unless otherwise specified . 7. Characteristics 7.1 Standard charge Charge the battery with DC stabilized power supply14.6 V, constant-current 0.2C(A) current until current reach to 0.02CA. 7.2 standard discharge Discharge the battery at 0.2C to 10V or the protection circuit come to protection, stop. 7.3 Electrical Performance Test Items 7.3.1 0.2C Discharging Performance 7.3.2 High Temperature Performance Test Methods After standard charge, store the battery for 0.5 1hr under...

 Open the catalog to page 7

HETER Electronics Group Product Specification PAGE DATE Discharge Charge 9. Cautions 9.1 Charging current should be less than maximum charge current specified in the Product Specification. Charging with higher current than recommended value may cause damage to cell electrical, mechanical and safety performance and could lead to heat generation or leakage. 9.2 The cell shall be discharged at less than the maximum discharge current specified in the Product Specification. High discharging current may reduce the discharging capacity significantly or cause over-heat. 9.3 It should be noted that...

 Open the catalog to page 8

HETER Electronics Group Product Specification 10.Warranty & Product Liability Warranty period begins from the delivery date, and is exclusively continued 6 months.HETER is not responsible for the incident caused by not obeying the specifications.Before using the battery, you should read the specifications,usage instruction and some attentions carefully to learn its application method and areas. If the phenominon such as error using method or wrong circuit connection,or input power data,working index are inconsistent with the specifications happen and cause damage to production,circuit and...

 Open the catalog to page 9

All Shandong Goldencell Electronics Technology Co Ltd catalogs and technical brochures

  1. 26650-26.2

    1 Pages

  2. 3.2V115AH

    1 Pages

  3. 24V100Ah

    7 Pages

  4. HETER-2013

    27 Pages

  5. HETER-201306

    12 Pages

  6. HETER

    1 Pages