Summary of Technical Document on Cutting Tools and Inserts

1. Threading Inserts Reference

Multiple pages (101-106, 185-186) repeatedly direct users to pages 107-108 for detailed information on threading inserts. This indicates that threading inserts are a critical component with dedicated specifications and details provided on those pages.

2. Toolholder and Insert Specifications

• Internal Grooving Tool Holders: Referenced on pages 113, 149 for GYM and GYIR series respectively, designed for medium feed machining and lateral operations.
• Face Grooving Toolholders: Detailed on pages 136-138, with ordering information on page 142.
• Parting & Grooving Toolholders: Covered on pages 155-166, including parting blades, toolblocks, and inserts with dimensions and parameters.
• Swiss-Type Tools: Mentioned on pages 115-122 and 119-122, with coated carbide inserts and specific toolholder models (e.g., KGDR/L series) and their parameters such as insert sizes and feed rates.
• Turning Tools for Automatic Lathes: Pages 169-170 provide specifications for tools like KGBFR series with insert references and dimensions.
• Imperial Standards: Pages 183-186 include imperial measurement standards and tool specifications, including threading inserts and turning tools with inch-based dimensions.

3. Insert and Tool Parameters

Several pages (107-108, 119-122, 163-166) provide detailed insert dimensions, insert codes (e.g., IC=3.969, IC=4.763), and parameters such as pitch, radius (Re), and feed rates. These are critical for selecting the correct insert for specific machining operations.

4. Fastening Components

Pages 105-106 mention screws and clamp screws used for securing inserts, indicating the importance of proper fastening for tool stability.

5. Toolholder Dimensions and Codes

Pages 131-132 and 145-146 provide detailed dimensional data for toolholders, including parameters like length (L), width (W), height (H), radius (Re), and specific model codes (e.g., TGDR-2020K-308T, KFDIR-S12K-16-207T). These details are essential for tool selection and compatibility.

6. Recommendations and Cross-References

• Consistent cross-referencing to specific pages for inserts and holders ensures users consult the correct detailed specifications.
• Medium feed machining and lateral operation modes are emphasized for certain toolholder series.
• Right-hand inserts are specifically noted on pages 177-180, highlighting orientation considerations.

7. Miscellaneous Notes

Several pages contain memos or placeholders (e.g., pages 125-126, 187) indicating areas for additional notes or updates.

Critical Information Highlights:

• Always refer to the specified pages for detailed insert and toolholder specifications before ordering or application.
• Threading inserts are centralized on pages 107-108, a key reference point.
• Toolholder dimensions and insert compatibility must be verified using the provided codes and measurements.
• Proper fastening with screws and clamps is essential for tool performance.
• Feed rates and machining modes (medium feeds, lateral) are specified for optimal tool use.

This document serves as a comprehensive reference for selecting and applying various cutting tools, inserts, and toolholders, with detailed cross-references ensuring precise matching of components for machining operations.