ERICCO INERTIAL TECHNOLOGY ER-MG-068 High Precision MEMS Gyroscope Introduction The ER-MG-068 High Precision MEMS Gyroscope (Alternative of Gyro3300) is a single-axis MEMS angular rate sensor, which is capable of measuring angular velocity up to a maximum of ±400°/s and with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word. The ER-MG-068 is intended for industrial, instrumentation, stabilization and other high performance applications. An advanced, differential sensor design resists the impact of linear acceleration, so that ER-MG-068 can operate in extremely harsh environments in the presence of impact and vibration. The ER-MG-068 is available in a hermetically sealed ceramic LCC surface mount package and it is capable of operating at 5V supply and a wide temperature range (−45°C to +85°C). Features Proven and robust silicon MEMS gyro Up to ±400°/s measurement range 0.3°/hr bias instability 0.125°/√hr angular random walk Digital output (SPI slave) 5V operation (4.75 ~ 5.25V supply) Low power consumption (35 mA) High shock and vibration rejection Hermetically sealed ceramic LCC surface mount package (11 x 11 x 2mm) Integrated temperature sensor RoHS compliant Applications Azimuth, attitude, position measuring and keeping in GNSS-assisted INS Heading, pitch, roll measuring in AHRS for UAV Motion survey and keeping in MRU Attitude & azimuth keeping, positioning in IMU Guidance, navigation, control in MEMS system Stabilizing & Pointing in satellite antenna, target tracking system Robotic Control & Orientation in Autonomous machines, Unmanned vehicles Whatsapp/Wechat/Mob:8613992884879 Websit : www.ericcointernational.com E-mail : ericco001@ericcointernat

ERICCO INERTIAL TECHNOLOGY Specifications Parameters Whatsapp/Wechat/Mob:8613992884879 Websit: www.ericcointernational.com E-mail: [email protected]