*mydirectindustry

ER-2MG-062

Product catalog summary

Introduction
The ER-2MG-062 is a high-performance 2-axis MEMS gyroscope known for its compact size, lightweight, simple structure, and reliability. It functions primarily as a motion sensor, measuring angular velocity to determine the motion state of an object.

Applications

Integrated Navigation Systems & Inertial Guidance System
Flight Control & Guidance System
Attitude Heading Reference Systems (AHRS)
Stabilization of Antennas, Cameras & Platforms

Specifications

Parameter	ER-2MG-062A	ER-2MG-062B	Unit
Range	300	400	deg/s
Scale Factor at 25°C	28000	20000	LSB/deg/s
Scale Factor Repeatability (1σ)	<50	<20	ppm
Scale Factor VS Temperature (1σ)	300	100	ppm
Scale Factor Non-Linearity (1σ)	<300	<100	ppm
Bias Instability(1σ 25℃)	0.03	0.03	deg/hr
Bias stability (10s 1σ)	<0.15	<0.5	deg/hr
Angular Random Walk	<0.01	<0.025	°/ √h
Bias Repeatability(1σ 25℃)	<0.3	<0.15	deg/hr
Size	38.6mm44.8mm25.5mm
Weight	≤70g
Operate temperature	-45~+85 ℃
Storage temperature	-55~+105 ℃

Product Composition and Working Principle
The gyroscope consists of a two-axis MEMS gyroscope, with data collected by an ARM microcontroller through a 1-channel digital interface SPI.

Technical Characteristics

Designed for miniaturization and low power consumption
Wide voltage design

Electrical Interface
The ER-2MG-062 uses a J30J-15ZKN-J output. The electrical pin definitions are provided in a table format.

Communication Protocol
The device uses an RS-422 serial interface with a default baud rate of 460800bps, 8-bit data, no check bit, and a 1-bit stop bit. The default data refresh rate is 400Hz.

Data Output Protocol
The protocol defines the byte structure for data output, including temperature and angular velocity measurements for x, y, and z axes. Note that certain bytes are not applicable for triaxial and dual-axis gyros.

Catalog excerpts

ERICCO INERTIAL TECHNOLOGY Introduction The ER-2MG-062 High Performance 2-Axis MEMS Gyro has small volume, light weight, simple structure and good reliability. The biggest function of the 2-axis gyroscope is to "measure the angular velocity to judge the motion state of the object, so it is also called a motion sensor". In other words, this thing can let our equipment know where we are and where we are going. " Integrated Navigation Systems & Inertial Guidance System Flight Control & Guidance System Attitude Heading Reference Systems (AHRS) Stabilization of Antennas, Cameras & Platforms Whatsapp/Wechat/Mob:8613992884879 Websit: www.ericcointernational.com E-mail: [email protected]

Open the catalog to page 1

ERICCO INERTIAL TECHNOLOGY Product composition and working principle The product is mainly composed of two-axis MEMS gyroscope. The working principle is as follows: the gyroscope data are collected by ARM microcontroller, two high-precision gyroscopes are collected by 1-channel digital interface SPI, Product technical characteristics a)The product is designed for miniaturization and low power consumption; b)Products with wide voltage design; Electrical interface The ER-2MG-062 uses J30J-15ZKN-J output. Electrical pin definitions are shown in Table 1. Whatsapp/Wechat/Mob:8613992884879 Websit :...

Open the catalog to page 2

ERICCO INERTIAL TECHNOLOGY Whatsapp/Wechat/Mob:8613992884879 Websit: www.ericcointernational.com E-mail: [email protected]

Open the catalog to page 3

ERICCO INERTIAL TECHNOLOGY NOTE:Bytes 5-28 are not available for triaxial gyros, bytes 5-28 and 45-52 are not available for dual-axis gyros. Whatsapp/Wechat/Mob:8613992884879 Websit: www.ericcointernational.com E-mail: [email protected]

Open the catalog to page 4

All SHAANXI ERICCO INERTIAL TECH. CO., LTD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list