beyond measurement level | flow | analytical | pressure | temperature

SGM-Lektra, over 40 years in the sector of industrial and process instrumentation Established in 1977, SGM LEKTRA produces instruments for measurement and control in industrial processes, in the integrated water cycle, and in the monitoring of temperatures for the agrifood and milling sectors. Each instrument is designed in accordance with the normative reference principles and produced in a quality control regime. Particular attention is dedicated to the applications for the remote control and programming of our instruments. The ongoing development and research of new technologies intended to...

Level Measurement and Control • Suitable for the measuring and control of level • system without contact with the material to be measured • measuring range from 1.5 m to 12 m • applicable for the measuring of liquids and solids in pieces • Regardless of the electrical characteristics of the materials to be measured • up to 70°C (product) and for pressures up to 1 bar relative • suitable for level measuring • applicable for the measuring liquids, solids and powders • measuring range up to 70 m (radial) • max. measuring range up to 30 m (cable), 3 m (rod) • applicable for the measuring of products...

Flow Measurement ULTRASONIC | TRANSIT TIME • suitable for the measuring of conductive liquids in pressure piping • internal coating of the sensor tube in neoprene rubber or PTFE • excellent level of precision and repeatability • versions for use in the food and pharmaceutical sectors • datalogger via USB pen drive • MID certification • setting and visualization of the principal data via Android app • specific for conducting capacity measuring in piping with clean liquids • non-intrusive installation by means of clamp-on sensors • datalogger • calorie count function • available in battery and...

unit adapted for analyses in waste water plants. MCA800 can be connected to sensors for the measuring of pH, Redox, turbidity, solids in suspension, conductivity, dissolved oxygen. Directly connection up to 2 sensors The 104C sensor is suitable for measuring pH in many applications. The porous septum in Teflon® resists to incrustations and chemical attacks. Used for measuring conductivity in pure and process waters. Conductive measuring method with two electrodes, reliable thanks to the use of graphite electrodes with temperature compensation used for measuring high conductivity in pure and process...

Pressure Measurement • miniature pressure transmitter, suitable for the continuous level measuring of liquids. • measuring accuracy ± 0.25%. • threaded and sanitary DIN / clamp fittings. • pressure transmitter 4÷20mA with 2 wires • capacitive sensor with ceramic membrane • accuracy: 0,2% FS • LCD display • compact transmitter, can be installed in any position • level transmitters 4÷20mA with 2 wires • pressures measured: Negative, Absolute • max. accuracy ±0.075% FS • for applications under severe conditions • for overload up to 500 bar (50MPa) • HART protocol • ATEX • differential pressure transmitter...

Monitoring Systems for Stored Cereals DIGITAL MULTIPOINT TEMPERATURE PROBES CONCENTRATORS FOR TT|TM PROBES • multipoint probes with sheath in AISI304 • suitable for the detection of temperature inside silos or warehouses for the storage of raw materials (cereals and derived products) • system in contact with the material to be measured • ATEX certification • Multiplexer concentrators suitable for the management and control of 1 to 32 digital thermometric probes, single or multipoint • on board setting and visualization via display and keyboard or by means of the Agritherm50 software or AgrithermT60...