Controlled by setting force. Foolproof operation. Sets blind rivet nuts up to M8 steel • Controlled by setting force Weight: 2.4 kg incl. battery (2.0 Ah) Setting force: 15.000 N Drive: Brushless motor (BLDC) Setting stroke: 10.0 mm Working Blind rivet nuts from M3 Alu range: up to M10 Alu, up to M8 steel and up to M6 stainless steel • Foolproof operation due to LED input field • State-of-the-art battery technology with the Cordless Alliance System • Intelligent error notification • Fully automatic screw-off and screw-on procedure • Virtually no wear due to brushless motor • 10 mm Setting stroke for small material thicknesses • Ideally suited for changing applications *Supplied in the L-BOXX including one battery 18 V (2.0 Ah) and a charger 18 V. Further variants available to order! GESIPA Blindniettechnik GmbH Nordendstraße 13-39 64546 Mörfelden-Walldorf

1. Card for presetting the setting force 1. Read off number in the table 2. Enter number on the display 3. Set blind rivet nuts 2. Charger for 18 V battery Charger with „AIR COOLED“ charging technology. Charging time approx. 40 min. with 2.0 Ah and approx. 80 min. with 4.0 Ah. For charging all battery packs of the CAS brands. 3. Li-Ion 18 V /2.0 Ah (Li-Ion) 100% compatibility with all 18 V machines and chargers of the CAS brands. Intelligent battery management, extremely long-lasting with capacity display and 3-year warranty, weight: 0.4 kg 4. Lighting The light-emitting diodes, which are precisely...