Data sheet Compactor premium range
Data sheet Compactor premium range
- Space-saving design
- Robust and simple construction
- Very high-pressure briquetting
- Feed screw with hydraulic drive
- Treated tooling
- Simple maintenance
- Recovery of cutting oils
- Rapid return on investment
- Lifetime warranty of the structure
- Siemens automation
| Model | Size of Briquettes (mm) | Capacity Max (Kg/h) | Effort of Briquetting (Kg/cm²) | Engine Power (KW) | Briquetting Pressure (bar) | Hydraulic Tank Volume (l) | Machine Dimension (mm) | Machine Weight (Kg) |
|---|---|---|---|---|---|---|---|---|
| PM1 | Ø40 | Steel: 50, Aluminum: 20, Sludges: ≤20 | 1592 | 4 | 250 | 100 | 3600 x 900 x 1600 | 950 |
| PM2 | Ø70 | Steel: 175, Aluminum: 70, Sludges: ≤70, Titanium: 70 | 1990 | 5.5 | 310 | 100 | 4000 x 1000 x 1900 | 1650 |
| PM2H | Ø70 | Steel: 300, Aluminum: 110 | 1559 | 7.5 | 300 | 200 | 4000 x 1000 x 2750 | 1900 |
| PM3 | Ø90 | Steel: 700, Aluminum: 280, Sludges: ≤180, Titanium: 280 | 2079 | 11.5 | 400 | 200 | 4100 x 2500 x 3100 | 5100 |
| PM3H | Ø120 | Steel: 1200, Aluminum: 500 to 750 | 2079 | 11 | 300 | 300 | 4100 x 2500 x 3650 | 5350 |
| PMT | Ø70 | Steel: 150T, Aluminum: 200T, Sludges: 150T, Titanium: 200T | 2359 | 37.5 | 300 | 1000 | 4100 x 2550 x 3300 | 5800 |
The size of the briquettes and the capacity of the machine depend on the form, humidity, and density of the chips.
The compactor starts its feed screw to fill the sleeve liner when material is present. Once filled, the briquetting cylinder is driven. After briquetting, the slide moves back, and the briquettes are evacuated. They are then fed one by one on the runner to fall into a BigBag or skip.
- Optional and original equipment includes position of the mixer, very high pressure (THP), great speed (SV), level sensor of hopper, visual alarm, on-board electrical cabinet, automaton with touch screen, pump and tub of lifting, cooler, independent hydraulic group, oil level, and return and air filter.
Catalog excerpts
L'OFFRE FLUIDE GLOBALE FILTRATION / TRAITEMENT DES COPEAUX HYDRAULIQUE PNEUMATIQUE Chip compactorPremium range> Advantages: S Space saving S Robust and simple construction S Very high-pressure of briquetting S Feed screw with hydraulic drive S Recovery of cutting oils S Rapid return on investment S Lifetime warranty of the structure The size of the briquettes and the capacity of the machine depend of the form, the humidity and the density of the chips.
Open the catalog to page 1
L'OFFRE FLUIDE GLOBALE FILTRATION / TRAITEMENT DES COPEAUX HYDRAULIQUE PNEUMATIQUE In presence of material, the compactor start his feed screw up to fill the sleeve liner. Once it's fill, the cylinder of briquetting is drive. When the briquetting is end, the slide move back and the briquettes are evacuated. For finish, it feed one by one on the runner up to fall in a BigBag or in a skip.
Open the catalog to page 2All SFH catalogs and technical brochures
Data sheet chips crusher2 Pages
- Rail conveyor
- Transport rail conveyor
- Belt conveyor
- Crushing plant
- Drying system
- Stationary crushing plant
- Pack unit
- Continuous drying system
- Double shaft shredding machine
- Wood shredder
- Electric hydraulic power unit
- Metal shredder
- Screw conveyor
- Trash compactor
- Centrifugal drying system
- Pneumatic conveying system
- Fixed waste compactor
- Briquetting press
- Suction unit
- Filter unit