ES-OUV-COMPACT 3045 A
2Pages

Application The use of the ES-OUV-COMPACT is justified when shaft deflection is not allowed. Its advantage over the ES-OUV is the reduced height. The plummer blocks for the end shafts allow different drive elements such as ballscrews, hydraulic or pneumatic to be mounted. Manufacturing The parts of the ES-OUV-COMPACT are made of grey cast iron. The fixing base and the table are ground. The standard model is delivered without ball screws or bellows. The indications given in the chart on page 83 refer to a standard assembly with rolled ball screws. (Precision of the ball screw is 0.1/300 mm). INNER DIAMETER D 0 mm OUTER DIAMETER D 0 mm Diameter Counterbore W 11 Diameter screw slot 6.5 plummer block V Diameter shaft hole PB d 30 Center distance shaft 40 bracket Y Center distance shaft holes 90 C Center distance bearing 47 holes in height X Height F 26.5 5.20 Product Designation ES-OUV- COMPACT 3045 A Outer diameter D 0 Total height unit H 79 Width shaft bracket A 60 High precision linear bearings and shafts CH-2016 Cortaillod — Switzerland Tel. : +41 32 843 02 02 Delivering Swiss Excellence Where Quality Matters

High precision linear bearings and shafts CH-2016 Cortaillod — Switzerland Tel. : +41 32 843 02 02 Delivering Swiss Excellence Where Quality Matters