PlasmaConnect Bas Non -Thermal Plasma for Water e Unit - and Wastewater Treatment PlasmaConnect is an innovative and future -oriented technology for advanced oxidation based on ionized air – known as non -thermal plasma (NTP). Due to its high efficiency, easy integration, and broad effectiveness against a wide range of pollutants, C -ION ™ technology sets new standards in modern water treatment. It removes even difficult -to-degrade organic substances such as drug residues, hormones, pesticides, and herbicides, and oxidizes inorganic substances such as metals (iron, manganese, and arsenic). I n addition, th e process has a disinfecting and decolorizing effect and contributes to a lasting improvement in the microbiological quality of water. PlasmaConnect is used in numerous areas – from wastewater and drinking water treatment to water reuse. Plasma generation: Dielectric barrier discharge (DBE) Plasma type: Non-thermal (cold) plasma Air inlet / plasma outlet: DN20 FEED REQUIREMENTS max. 120 l/min OPERATION INFORMATION Power supply: 5 m³/h * *depending on the degree of contamination Please also note: Inlet and outlet at opposite ends of the tank to avoid short circulation Keep the plasma hose as short as possible (efficiency reduction) Connecting parts must be ozone resistant The oxidation tank must be designed as a closed system with exhaust air openings . Ozone enrichment is possible in the oxidation tank . SFC Umwelttechnik GmbH | Julius -Welser -Str. 15 | 5020 Salzburg | Austria Tel.: +43 (0) 662 / 43 49 02 | Mail: [email protected] Website : www.

INCL. AERATION PACKAGE Ready-to-connect base unit including control panel High oxidation potential (2.75 V through the formation of hydroxyl radicals, reaction rate 2.2-107 to 1.8-1010 M-ls-1) Lowerenergyconsumptioncompared tootheroxidat ionprocesses, e.g.,ozone No xOditiona i coolingreqrirod No noecia i ^;<p^ln^innoromnicninr^oxI^^O^me Orxn^s^;^urp^t;rectL^^d No c^ha^oin^a i(^(tnsonai^lnpi^esri^:i No nsoplyairPrxeOmnePrequirod Exny retrofittingo rex^^tin etan k^pcoa^ible 1 Disc diffuser: 12" x 70 mm; 1.35 kg; connection: 1” 1 Concrete base plate: 320 x 220 x 70 mm; 9.6 kg; connection: 16 mm...