MembraConnect 16-12

Product catalog summary

Product Description
MembraConnect TM 1612 is a compact ultrafiltration system designed for both wastewater and drinking water treatment. It features the PFAS-free, patented C-MEMTM membrane, which effectively removes particulate turbidity, bacteria, and viruses. The system is suitable for connection to various raw water sources and includes automated processes such as water backwash, air scouring, sludge draining, and membrane integrity testing. Typical applications include use in holiday homes, tiny houses, and disaster relief scenarios.

C-MEMTM Membrane Specifications
The membrane is made from high-density polyethylene (HD-PE) with a medium pore size of 20 nm (0.02 µm). Each bundle contains 1400 fibers with a filter area of 1.5 m².

C-MEMTM Cartridge Specifications
Each cartridge contains 8 bundles, providing a total filter area of 12 m². The cartridge dimensions are 410 mm in height and 165 mm in diameter, with 1 ¼˝ external thread connections for air scouring and clean water.

Product Specifications
The system includes 16 cartridges, offering a total filter area of 192 m². It is constructed from stainless steel 304/304L, with dimensions of 1,200 x 800 x 1,950 mm plus two additional units of 1,200 x 800 x 1,450 mm. The system weighs approximately 820 kg and features DN 50 connections for raw water, clean water, backwash water, and drain.

Feed Requirements
The system operates within a temperature range of 4 – 40°C (39 - 104°F) and can handle solids content of less than 10 mg/l and dissolved substances of less than 1,000 mg/l.

Operation Information
The system has a flow rate of 26 m³/h at 2 bar, with a pressure range of 1.0 – 6.0 bar. The maximum transmembrane pressure is 3.0 bar, and the maximum backwash pressure is 1.0 bar. It requires a 400V/50Hz (3-phase) power supply, with a power demand of less than 10/150 W/m³ (without/with booster pump). The system can handle a maximum free chlorine concentration of 5000 ppm at 25°C (77°F) and a total chlorine contact of 1.0 million ppm (hours cumulative).

Product Highlights
The system achieves up to 99.9999% removal of particulate turbidity, bacteria, and viruses. It complies with EN ISO 9308 removal tests and European regulations for drinking water use. The unit passes ASTM D 6908:2006 integrity testing and does not require regular filter replacement, offering a service life of up to 10 years. It features automatic backwash and integrity testing, fully automatic control with remote capabilities, and is modular and pre-assembled for easy installation.

Optional Packages
Available options include automatic in-situ chemical cleaning, a pressure booster pump, and system integration into building management systems.

Disclaimer
The document states that the information is accurate and reliable but does not guarantee performance. Dimensions and membrane geometry may change due to production and process enhancements, and no liability is assumed for outcomes or damages from using the unit.

Catalog excerpts

Product Data Sheet Compact Ultrafiltration System for Wastewater and Drinking Water PRODU C T DESCRIPTION MembraConnect TM is an innovative, universally applicable ultrafiltration unit for raw water and drinking water treatment. MembraConnect TM contains the PFAS -free, patented C -MEMTM membrane for the remov al of particulate turbidity, bacteria and viruses . It can be connected directly to tap water, wells, springs or other suitable raw water sources. It is equipped with fully automated water backwash, air scouring, sludge draining, and membrane integrity test. Typical applications are holiday homes, tiny houses, disaster relief, etc. HD-PE (High Density -Polyethylen e) Medium pore size: Filter area per bundle : Filter area: 1 ¼˝ External thread (air scouring, optional) 1 ¼˝ External thread (clean water) PRODUCT SPECIFICATIONS Tank / Piping material: Raw water and clean water: DN 50 Backwash water: DN 50 Drain: DN5 0 FEED REQUIREMENTS OPERATION INFORMATION Temperature range: Solids Content: Dissolved substances: 26 m³/h (at 2 bar) * dependent on degree of contamination and temperature Power supply: Power demand: < 10 / 150 W / m³ (without /with booster pump) Max. total chlorine contact: SFC Umwelttechnik GmbH | Julius -Welser -Str. 15 | 5020 Salzburg | Austria Tel.: +43 (0) 662 / 43 49 02 | Mail: [email protected] Web

Open the catalog to page 1

■ Removal of particulate turbidity, bacteria and viruses up to 99.9999% (log 6 / log 5) ■ EN ISO 9308 removal-tests based on Escherichia coli (ATCC 8739), Enterococcus Faecium (ATCC 19433), Brevundimonas diminuta (ATCC 19146) and Pseudomonas Phage Phi 6 (ATCC 59135) ■ Membrane and other materials are in accordance with European Regulation EU No. 10/2011 and No. 1935/2004 for the use with drinking water ■ Leak test of the unit in accordance with ASTM D 6908:2006; ‘Standard Practice for Integrity Testing of Water Filtration Membrane Systems’ passed ■ No regular filter replacement needed. Service...

Open the catalog to page 2

All SFC Umwelttechnik GmBH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list