Modell/Model: THERM

Product catalog summary

Product Overview: The document describes the SEWEC OZON GmbH's thermal ozone destructor model 'THERM', designed for the efficient removal of ozone from off-gas. It features a unique integrated pre-heating zone for optimized energy utilization and offers custom-tailored units.

Specifications:

Models: THERM 8, THERM 25, THERM 50, THERM 100
Gas Flow Capacity: Ranges from 8 to 100 Nm3/hr
Pressure Drop: Less than 5 mbar for all models
Maximum Operating Temperature: 350°C
Operating Pressure: Atmospheric
Installed Heater Capacity: Varies from 1 kW to 12 kW
Electrical Power Supply: 230V, 50/60 Hz for THERM 8; 400V, 50/60 Hz for other models
Dimensions: Diameter ranges from 280 mm to 800 mm; Total height ranges from 1000 mm to 1800 mm
Connections: Gas inlet and outlet sizes vary by model

Installation:

THERM 8 and THERM 25: Wall-mounted using fixing angles; condensate or leakage water should be drained into a water trap.
THERM 50 and THERM 100: Floor-mounted; condensate or leakage water should be drained into a water trap.

Maintenance: The ozone destructor is maintenance-free under normal conditions. An annual check of heaters and temperature controllers is recommended.

Additional Information: Technical changes may occur without prior notice, and higher gas flow rates are available upon request.

Catalog excerpts

RESTOZONVERNICHTER / OZONE DESTRUCTOR Modell/Model: THERM Thermisch / Thermal type Kompakter, thermischer Restozonvernichter zur effizienten Entfernung von Ozon aus Abluft. Einzigartige integrierte Vorheizzone zur optimalen Energieausnutzung. Kundenspezifische Ausfuhrungen verfugbar. Compact thermal ozone destructor for effective removal of ozone from off-gas. Unique integrated pre-heating zone for optimized energy utilization. Custom-tailored units available. SEWEC OZON GmbH Rossmatt 2, D-79664 Wehr Tel: +49 7762 806580, Fax: +49 7762 8065829 E-Mail: [email protected], web: www.sewec-ozon.de

Open the catalog to page 1

Montage THERM 8 und THERM 25 Wandmontage mittels Befestigungswinkel, Kondens- oder Leckagewasser in Wasservorlage ableiten (siehe Bild) Montage THERM 50 und THERM 100 Bodenmontage, Kondens- oder Leckagewasser in Wasservorlage ableiten (siehe Bild) Wartung: Unter normalen Betriebsbedingungen ist der Restozonvernichter wartungsfrei. Eine jahrliche Kontrolle von Heizung und Temperaturregler ist ausreichend Assembly THERM 8 and THERM 25 Wall-mounting by means of provided fixing angles Condensate or leakage water to be drained into a water trap (see figure) Assembly THERM 50 to 100 Floor-mounting...

Open the catalog to page 2

All Sewec Ozon GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list