Modell/Model: KAT

Product catalog summary

Specifications:
The Ozone Catalyst Model KAT is designed for the effective removal of ozone from air or oxygen with concentrations up to >200 g/Nm³. It features a stainless steel cylindrical container filled with highly effective catalytic material, specifically copper-manganese-oxide. The device operates at atmospheric pressure and supports gas flow rates from 4 to 200 Nm³/h, depending on the model. Operating temperatures range from 30°C to over 100°C, with a pressure drop of 5 to 20 mbar. Electrical power supply requirements vary from 0.08 to 2.0 kVA at 230V/50Hz.

Design and Features:
The catalyst is thermally insulated with an aluminum sheet cover and includes a heater to prevent condensate formation, controlled by a digital temperature controller and sensor. Dimensions and weights vary across models, with diameters ranging from 95 mm to 460 mm and heights consistently at 1100 mm for larger models.

Assembly Instructions:
The ozone catalyst is intended for wall mounting. Condensation or leakage water should be drained into a water trap. Electrical connections must follow the terminal connection plan. The outlet gas pipe should not have any valves and must be installed to prevent condensate accumulation, avoiding pressure increases and moisture in the catalytic material.

Maintenance:
Under normal operating conditions, the ozone destructor is maintenance-free. However, an annual check of the heater, function, and catalytic material is recommended to ensure optimal performance.

Catalog excerpts

ozone technology at its best! OZONKATALYSATOR / OZONE CATALYST Modell/Model: KAT SEWEC OZON GmbH Rossmatt 2, D-79664 Wehr Tel: +49 7762 806580, Fax: +49 7762 8065829 E-Mail: [email protected], web: www.sewec-ozon.de

Open the catalog to page 1

A SEWEC / OZON \ ozone technology at its best! Spezifikation Der Ozonkatalysator dient zur wirkungsvollen Entfernung von Ozon aus Luft oder aus Sauerstoff mit Ozonkonzentrationen bis >200g/Nm3. Das Gerat besteht im Wesentlichen aus einem zylindrischen Edelstahlbehalter, befullt mit hochwirksamem katalytischen Material. Zur Vermeidung von Kondenswasserbildung in der Katalisatorschuttung ist eine Heizung eingebaut, die mittels digitalem Temperaturregler und -sensor geregelt wird. Der Katalisatorbehalter hat eine thermische Isolierung mit einem Mantel aus Aluminiumblech. Montage Der Ozonkatalysator...

Open the catalog to page 2

Modell/Model: KAT

Modell/Model: KAT

Catalog excerpts

All Sewec Ozon GmbH catalogs and technical brochures