1. Catalogs
  2. Sewec Ozon GmbH
  3. Modell/Model: AKF

Modell/Model: AKF

Modell/Model: AKF

Modell/Model: AKF

Product catalog summary
Product Overview: The document provides technical specifications and installation instructions for the SEWEC OZON GmbH ozone destructor models AKF015, AKF035, AKF100, AKF150, and AKF600. These models utilize activated carbon filters specifically designed for ozonized air, not for ozonized oxygen gas due to fire hazards.
Specifications:
  • Gas flow rates range from 1.5 Nm³/hr for AKF015 to 60 Nm³/hr for AKF600.
  • Pressure drop is consistently 5 mbar across all models.
  • Operating temperature is between 5°C and 40°C.
  • All models operate at atmospheric pressure and use activated carbon as the filling material.
  • Dimensions and weights vary, with the AKF600 being the largest and heaviest.
Installation Instructions:
  • AKF015 and AKF035 require wall mounting using tube clamps, with leakage water directed to a water trap.
  • AKF100 and AKF150 also require wall mounting but use fixing angles.
  • AKF600 is floor-mounted, with leakage water directed to a floor drain.
Maintenance: The ozone destructors are nearly maintenance-free under normal conditions. Annual checks of the activated carbon are recommended, with replacements needed if pressure drop increases or ozone is not adequately destroyed.
Additional Information: Ozone filters for air flow rates up to 30,000 m³/h are available upon request. Technical changes may occur without prior notice.
See more

Catalog excerpts

Modell/Model: AKF-1

ozone technology at its best! Wasservorlage / Water SEWEC OZON GmbH Rossmatt 2, D-79664 Wehr Tel: +49 7762 806580, Fax: +49 7762 8065829 E-Mail: [email protected], web: www.sewec-ozon.de

 Open the catalog to page 1
Modell/Model: AKF-2

Montage AKF015 Wandmontage mittels Rohrschellen (dm.110mm) Das Leckagewasser muB mittels Abtauchrohr in eine Wasservorlage abgeleitet werden. (siehe Skizze) Montage AKF035 Wandmontage mittels Rohrschellen (dm.160mm) Das Leckagewasser muB mittels Abtauchrohr in eine Wasservorlage abgeleitet werden. (siehe Skizze) Montage AKF100 and AKF150 Wandmontage mittels Befestigungswinkel. Das Leckagewasser muB mittels Abtauchrohr in eine Wasservorlage abgeleitet werden. (siehe Skizze) Montage AKF600 Bodenmontage . Das Leckagewasser soll in einen Bodenablauf abgeleitet werden Wartung: Unter normalen Umstanden...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.