Wind Speed Sensor Wind Speed Sensor Wind speed sensor, also known as anemometer is a professional and intelligent measuring device designed for environmental and industrial applications, especially for areas such as PV Power Plants. This Sensor measures wind speed by converting it into an electrical signal in m/s. The Wind speed sensor is designed to measure horizontal wind speed independently of direction. The measuring electronic element in the wind speed sensor is the reed relay driven by the rotating magnet connected to the wind bowls. Specifically tailored to meet the needs of PV Power Plant monitoring systems, it is resistant to harsh weather conditions. SEVEN offers an optional Heated Wind Speed model to prevent icing events. • High Accuarcy • Fast & Simple to Install • Free Software Update (for Modbus RTU) • Long Lifetime • SunSpec Compliant (for Modbus RTU) • SEVEN Remote Setup Service • SEVEN Customer Support It is an anemometer designed to measure the wind speed in m/s with reed realy output.The housing is made of seawater resistant anodized aluminum, making the sensor extremely durable and resistant. It can be connected to SEVEN Irradiance Sensor or Sensor Box models, as well as data loggers and other receiver units supporting Pulse reading. It is an anemometer designed to measure the wind speed in m/s with 4-20 mA output. The housing is made of seawater resistant anodized aluminum, making the sensor extremely durable and resistant. This model is compatible with all dataloggers with 4-20 mA input. It is an anemometer designed to measure the wind speed in m/s with Modbus RTU output. The housing is made of seawater resistant anodized aluminum, making the sensor extremely durable and resistant. This model is compatible with all dataloggers with Modbus RTU input. Pinarcay OSB Mah. Organize San. Tesisleri 11. cad. No:35 Merkez / Corum • Phone: +90 364 230 1233 • Website: www.sevensensor.com • Email: [email protected]

3S-WS Wind Speed Sensor It is technically similar to 3S-WS-PLS-A model. The only difference is the housing, which is made of UV-Resistant ASA material. It can be connected to SEVEN Irradiance Sensor or Sensor Box models, as well as data loggers and other receiver units supporting pulse. It is technically similar to 3S-WS-I-A model. The only difference is the housing, which is made of UV-Resistant ASA material. The housings are made of UV-resistant ASA material. It is technically similar to 3S-WS-MB-A model. The only difference is the housing, which is made of UV-Resistant ASA material. Technical...

Technical Drawings M5-x3/120 (For Mounting on the Pipe) M5-x3/120 (For Floor Mounting) Note: All dimensions are in mm. Note: All dimensions are in mm. M5-x3/120 (For Mounting on the Pipe) M5-x3/120 (For Floor Mounting) 60 M4x12-x4 Stainless Metal Insert-x2 (For Floor Mounting) Stainless Metal Insert-x2 (For Mounting on the Pipe) 60 M4x12-x4 Stainless Metal Insert-x2 (For Floor Mounting) 3 Pinarcay OSB Mah. Organize San. Tesisleri 11. cad. No:35 Merkez / Corum • Phone: +90 364 230 1233 • Website: www.sevensensor.com • Email: [email protected]