/sensor solutions 3S-MT-PT1000 Module Temperature Sensor The Module Temperature Sensor is part of the SEVEN meteorological sensor range, which includes professional and intelligent measuring sensors with a digital or analog interface for environmental and industrial applications such as PV plants. It is a measuring transmitter used for the measurement of the PV module temperature. PT1000 is either encapsulated with ABS plastic injection or laminated between EVA film and a Tedlar backsheet. It is attached to the back of the module with a 3M® tape placed on the sensor. This specially chosen tape provides a safe attachment of the PT1000 to the module. The measured module temperature data are transmitted as analog or digital output signals to the data loggers and receiver units according to the input requirements. This product is specifically designed according to the requirements of PV plant monitoring systems, in compliance with IEC 60751:2022 and IEC 61724-1:2021 Annex B. • High Accuracy • Ultralight Design for Better Attachment • Fast & Simple to Install • Smaller Than 10% of a Single Cell Area on the Panel • SEVEN Remote Setup Service • SEVEN Customer Support It is a measuring transmitter with PT1000 output used for the measurement of the PV module temperature. The measured values are transmitted as ohmic resistance signals. It can be connected to SEVEN Irradiance Sensor or Sensor Box models with a 5-pin connector with IP 67 protection class. It can also be directly connected to data loggers and other receiving units with compatible inputs. Module temperature sensors with analog 4-20 mA output are specially designed for advanced environmental conditions. The PV module temperature is detected by a high precision PT1000 sensor and converted to analog 4-20 mA output with an electronic card placed in UV resistant and high protection box. Module temperature sensors with analog 0-10 V output are specially designed for advanced environmental conditions. The PV module temperature is detected by a high precision PT1000 sensor and converted to analog 0-10 V output with an electronic card placed in UV resistant and high protection box. Professional and intelligent measuring sensors with a digital interface for environmental and industrial applications such as PV plants. The measured value can be transmitted to monitoring instruments, data loggers and other receiving units via the serial RS485 interface with MODBUS RTU protocol. Pinarcay OSB Mahallesi Organize Sanayi Tesisleri Teknokent Idare Binasi No: 7, D:1, 19100 Merkez / Corum / Turkiye • Phone: +90 364 230 1233 • Website: www.sevensensor.com • Email: [email protected]

Sensor Type Measuring Range Data Output Communication Protocol Power Supply Power Consumption 1 m 2x2x0,22 24 AWG LI2YC11Y-TP PUR Cable and 2 m 2x2x0,22 mm² LIY2Y(SE)GRP PUR Cable, UV and Weather Resistant Ø 33 mm x 3,5 mm Plastic model Ø 35 mm x 2 mm EVA model Sensor Cover Dimensions 167 gr Operating Temperature Range 3 m 2x2x0,22 mm2 24 AWG LI2YC11Y-TP PUR Cable, UV and Weather Resistant Electrical Connection Sensor Cover Laminated Backsheet (EVA - Tedlar) / ABS Plastic Injection ® Mounting Method 3M Tape to Back of Module Class A according to IEC 60751:2022 and IEC 61724-1:2021 TÜRKİYE Origin...

Module Temperature Sensor *** SEVEN has the right to make modifications on this documentation without notice. Pinarcay OSB Mahallesi Organize Sanayi Tesisleri Teknokent Idare Binasi No: 7, D:1, 19100 Merkez / Corum / Turkiye • Phone: +90 364 230 1233 • Website: www.sevensensor.com • Email: [email protected]