1. Catalogs
  2. SEVEN Sensor Solutions
  3. Capacitive Silo Level Sensor (3S-SLS-CA)

Capacitive Silo Level Sensor (3S-SLS-CA)
1 /3Pages

Capacitive Silo Level Sensor (3S-SLS-CA)

Capacitive Silo Level Sensor (3S-SLS-CA)
1 /3Pages

Catalog excerpts

Capacitive Silo Level Sensor (3S-SLS-CA)-1

Capacitive Silo Level Sensor /sensor solutions Capacitive Silo Level Sensor The SEVEN Capacitive Silo Level Sensor is used for detecting the level of solid materials, such as powders or granules, in silos, tanks, and bunkers. Capacitive sensors detect materials by utilizing the electric field created by electric charges. When the product to be detected comes near or makes contact with the sensor, the capacitance value changes according to the adjustable sensitivity level, and this data is sent to the automation system through the sensor’s relay. The status of the sensor can also be monitored via the warning light on the sensor. The Warning Light operates in 3 different modes: • When the warning light is continuously off, it indicates that there is no power to the sensor. • When the warning light is flashing, it indicates that the silo is not yet full. • When the warning light is continuously on, it indicates that the silo is full. Adjustable Level Sensitivity Fast Detection Durable Enclosure Vertical Mounting Optional Rope Length Status Monitoring with Warning Light SEVEN Customer Support 1 Year Warranty The standard rope length is 100 cm. It can be increased or decreased upon request Pinarcay OSB Mah. Organize San. Tesisleri 11. cad. No:35 Merkez / Qorum • Phone: +90 364 230 1233 • Website: www.sevensensor.com • Email: [email protected]

 Open the catalog to page 1
Capacitive Silo Level Sensor (3S-SLS-CA)-2

General Structure Level Sensitivity *GROUND CONNECTION When the solid material in the silo, tank, or bunker is below the set level of the capacitive silo sensor or when these storage units are empty, the COM–NC connection becomes active, and the warning light starts flashing. When the solid material in the silo, tank, or bunker is at or above the set level of the capacitive silo sensor, the COM–NO connection becomes active, and the warning light remains steadily on. Voltages above 26V may damage the electronic board, while voltages below 18V may cause the system to operate unstably. It is recommended...

 Open the catalog to page 2
Capacitive Silo Level Sensor (3S-SLS-CA)-3

Power Cable Input Warning Lamp Coupling Sleeve *Steel Wire Rope - (X) Note: All measurements are given in mm. *The rope length in the 3S-SLS-CA-1 model is 1 meter. *The rope length in the 3S-SLS-CA-2 model is 2 meters. 3 Pinarcay OSB Mah. Organize San. Tesisleri 11. cad. No:35 Merkez / Çorum • Phone: +90 364 230 1233 • Website: www.sevensensor.com • Email: [email protected]

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.