EN - CALVET
11Pages

CALORIMETRY & APPLICATIONS KEP Technologies is not simply an instrument company, but a full solution provider. We do not claim that a single product is suited for all applications and have with our SETARAM brand developed a range of products with different characteristics to more closely meet your demands. We are confident that with KEP Technologies you will find a dedicated calorimetry solution with the performance you need to get the best understanding of your materials. This being the case no matter which of our below market segments you may work in. Each Calvet calorimeter also embodies...

CALVET LINE CALORIMETERS PLUG-IN ACCESSORIES Our range of calorimeters for the characterization of materials across wide temperature ranges and using all common calorimetry techniques. High Pressure Measurement and control of sample pressure Ambient to 600°C CALVET DC ALEXSYS CALVET CRYO EXPERIMENTAL OPTIONS & VERSATILITY Stand alone wet gas generator Humidity Control High pressure mass spectrometer DSC – DIFFERENTIAL SCANNING CALORIMETRY Measures heatflow, heat and heat capacity CALISTO - CALORIMETRY SOFTWARE MIXING Can mix two or more samples inside the calorimeter sensor for heat of...

CALVET The 3D sensor of CALVET is composed of 2 cylindrical thermopiles: each has 9 concentric rings, and each ring contains 19 thermocouples (171 in total). Each thermopile totally surrounds either the sample or the reference zone to measure heat in all directions. HIGHEST HEAT MEASUREMENT ACCURACY Calvet 3D sensor based on thermocouples with Joule effect calibration ISOTHERMAL OR TEMPERATURE SCANNING MODES for increased flexibility and replication of real life conditions CALVET is based on a highly robust calorimetric block, controlling the measurement zone at a constant temperature or...

CALVET CRYO CALVET CRYO is based on a calorimetric block, controlling the measurement zone at a constant temperature or heating rate, up to 200°C. HIGHEST HEAT MEASUREMENT ACCURACY Calvet 3D sensor based on thermocouples with Joule effect calibration The 3D sensor of CALVET CRYO is composed of 2 cylindrical thermopiles: each has 480 thermocouples. Each thermopile totally surrounds either the sample or the reference zone to measure heat in all directions. SUB-AMBIENT TEMPERATURE OPERATIONS with solutions adapted to your need down to as low as -196°C ISOTHERMAL OR TEMPERATURE SCANNING MODES...

HIGH TEMPERATURE OPERATIONS up to 600 °C CALVET HT is based on a heated calorimetric block to reach temperatures as high as 600°C, at a constant temperature or heating rate. ISOTHERMAL OR TEMPERATURE SCANNING MODES for increased flexibility and replication of real life conditions CONVENIENT INTERCHANGEABLE CRUCIBLES AND CELLS to perform even the most demanding experiments using one instrument : • high pressure (up to 400 bar) and high vacuum • pressure measurement and control • mixing/stirring experiments A cooling water circuit enables the outer surfaces of the calorimeter to stay at a...

CALVET PRO HIGHEST HEAT MEASUREMENT ACCURACY Calvet 3D sensor based on thermocouples with Joule effect calibration HIGHEST MASS VARIATION ACCURACY with its optional Hang-down Symmetrical Beam Balance CALVET PRO is based on a highly robust calorimetric block, controlling the measurement zone between -120 and 830 °C. SUB-AMBIENT TO HIGH TEMPERATURE OPERATIONS with solutions from -120 to 830 °C ISOTHERMAL OR TEMPERATURE SCANNING MODES for increased flexibility and replication of real life conditions CONVENIENT INTERCHANGEABLE CRUCIBLES AND CELLS to perform even the most demanding experiments...

CALVET LV HIGHEST HEAT MEASUREMENT ACCURACY with Calvet 3D sensor based on thermocouples with Joule effect calibration ISOTHERMAL CONDITIONS from ambient to 200 °C LARGE SAMPLE VOLUMES up to 100 mL, or two D-type batteries The 3D sensor of CALVET LV is composed of 2 or 4 cylindrical thermopiles. Each has up to 1316 thermocouples. Each thermopile totally surrounds either the sample or the reference zone to measure heat in all directions. CONVENIENT INTERCHANGEABLE CRUCIBLES AND CELLS to perform even the most demanding experiments using one instrument : • high pressure (up to 350 bar) and...

CALVET DC is based on a modular high temperature furnace, that can be equipped with two exchangeable sensor types for distinct high temperature measurements: Heat Flux DSC or Drop Calorimetry. IMPROVED HEAT CAPACITY AND HEAT MEASUREMENTS with Calvet 3D sensor based on thermocouples HIGH TEMPERATURE MEASUREMENTS BY DROP CALORIMETRY for accurate heat capacity, and heat content measurements The Drop sensor is composed of 56 thermocouples placed between a reference zone and a sample zone. It is calibrated by dropping sapphire pellets between each experiment. HIGH TEMPERATURE MEASUREMENTS BY...

Drop calorimetry simply consists of letting a sample of material drop at room temperature into a calorimeter placed at high temperature. BEST IN CLASS HIGH TEMPERATURE MEASUREMENTS BY DROP CALORIMETRY improved heat capacity, heat of phase transitions, heat content measurements The drop calorimeter measures the heat necessary to change the temperature of the sample from room temperature to the high temperature. HIGHLY SENSITIVE HIGH TEMPERATURE CALVET 3D SENSOR dual drop capability with a measurement drop tube and a reference drop tube The 3D sensor of CALVET DC ALEXSYS is composed of 2...

MC • Specifications are given as indications only and are not contractual • 07/20 Switzerland – France – China – United States – India – Hong Kong For contact details: www.setaramsolutions.com or setaram@kep-technologies.com Setaram is a registered trademark of KEP Techn