Catalogs >
Sesotec GmbH >
RAYCON D+HX

RAYCON D+HX
1 / 4Pages

Catalog excerpts

X-ray source X-RAY INSPECTION RAYCON D+ HX The high-end model of intelligent X-ray inspection systems for packaged products Conformity & Accuracy Safety for people & product Simple operating concept Hygienic design concept Efficiency in all areas Reliable and fas

Open the catalog to page 1

RAYCON exceeds international standards: YOUR PRIORITIES, OUR ANSWERS: Optimum X-ray inspection with the 6P concept Our X-ray systems have been specially developed for use in the food industry and reliably detect foreign bodies such as metals, glass, ceramics, stones, raw bones, PVC and many other product defects. Through this precise inspection, conformity with all important guidelines of the food industry such as IFS, BRC or FSSC 22000 are fulfilled and reliable protection against complaints and recalls can be ensured. Glass 1,0 - 1,5 mm Knife fracture Wire Bones Reliable detection of...

Open the catalog to page 2

The newly developed software filters improve the detection accuracy of foreign bodies with lower density. The Glassincreaser, for example, optimizes the detection of glass fragments, while the Bonedetector improves the detection of bone and cartilage. In addition, the Wirefinder can reliably detect smaller elongated wire forms. „Integrated Compliance Monitoring“ ensures that the speciﬁed sensi�vi�es are con�nuously checked at predeﬁned �me intervals. This control of detec�on requirements leads to immediate detec�on of devia�ons and increases the stability of the produc�on process....

Open the catalog to page 3

Functional diagram The system consists of the following main components: A X-ray tube: Here the X-rays are generated electrically. They exit the tube through a narrow slit and penetrate the products to be inspected/examined from the bottom to the top as a fan-shaped beam. C Transport system: A PE flat belt (self-guiding) transports the product to be examined evenly through the X-ray beam. This makes it possible to scan the product line by line. D Detector unit: The linear detector installed above the inspection aperture converts the incoming X-ray beams into an electrical signal from which...

Open the catalog to page 4