RAPID 4000 Metal separator for free-fall applications ■ Detects and separates magnetic and non-magnetic metal contamination, even when enclosed in product ■ Reduces expensive machinery failure and minimises production downtime ■ Ensures product quality ■ Prevents customer complaints ■ Break even within a very short period of time • Separated detection and separation units: - Free-fall height can be individually adjusted on site - Position of waste reject unit can be turned to match position of collecting tray • Minimal waste through „Quick-Flap“ rejection system • Learn automatic or manual product compensation (not pre-adjusted) to improve adaption to product and conveyor belt conductivity • Standard adaptor system Jacob-Rohrbau (= Jacob pipe system) enables quick, hassle-free installation • Pre-installed parameters simplify operation • High scanning sensitivity to all metals • Low installation height, the metal separator can be easily fitted into existing pipeline systems • Increased signal-to-noise-ratio towards electromagnet

Installation example: Metal separator RAPID 4000 used for quality control at a filling station for dried vegetable, (old version) Scope of delivery: • Metal separator with separated detection and separation units (installation via Jacob fastener) • Control Unit GENIUS+ Product Description: The metal separator RAPID 4000 is used to analyse bulk goods in free-fall conveyor pipes. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) - even if enclosed in the product. Metal contaminations are rejected through the "Quick Flap" reject unit. The metal separator...