SERVO MOTOR GEARHEADS Planetary arm bracket and output shaft are one-piece constructed, using tapered roller bearings can bear the axial load and radial load that are more than deep groove ball bearings. Setting the bearing apart for larger span to reach the largest torsional rigidity and contribute high axial load and radial load capacity. Grinding process to smooth surface of output shaft, and with oil seal to minimum friction coefficient and reducing start up load; result in the best seal-ability and extended lifespan. Hollow out-put shaft connect perfectly with circular flange drastically...

Specifications Dimensions ★ C1~C9 are motor specific dimensions(metric std shown ), Size may vary according to motor flange. ★ Specification subject to change without notice. SESAME www.sesamemotor.com

Specifications Dimensions ★ C1~C9 are motor specific dimensions(metric std shown ), Size may vary according to motor flange. ★ Specification subject to change without notice.

Specifications Dimensions ★ C1~C9 are motor specific dimensions(metric std shown ), Size may vary according to motor flange. ★ Specification subject to change without notice. SESAME www.sesamemotor.com

Specifications Dimensions ★ Specification subject to change without notice.

* 1. Applied to the output shaft center @100rpm. * 2. Measured at 3000rpm with no load ^ The above figures/specifications are subject to change without prior notice. Products due to human error, natural disasters or other factors lead to poor or damaged, will not be covered under warranty.